Buffalo TeraStation TS3400D User Manual page 64

4
Select a volume to connect from the drop-down menu of "Volume" and click Connect.
5
Click OK.
Connecting a volume is finished.
If using the connected volume for the first time, the volume should be formatted to be used as a local drive. Follow
the procedure below for formatting.
1
In Windows, navigate to Control Panel - Administrative Tools - Computer Management.
2
Click Disk Management.
When the "Initialize Disk" screen is displayed, click OK without changing any settings.
3
Right-click the disk volume that shows the status "Unallocated" and click New Simple Volume from the
displayed menu. Follow the screen to finish formatting.
Formatting a volume is finished. When the formatting process is completed, the drive will be visible as an icon in
Computer or My Computer and can be used as a normal drive on the computer.
Disconnecting a Volume
1
Click Start - Programs - Buffalo - iSCSI Connection Tool - iSCSI Connection Tool.
iSCSI Connection Tool will open.
63