7
Click OK twice.
8
In the "Targets" tab, select the volume from "Discovered targets" and click Connect.
9
Click Advanced.
10
Check "Enable CHAP log on" and enter the configured username into the "Name" field and password into the
"Target secret" field.
If mutual authentication is enabled, check "Perform mutual authentication".
11
Click OK twice.
12
If the status of the selected volume is displayed as "Connected" under "Discovered targets", the connection is
established properly.
Accessing the access-restricted volume is finished.
Using Buffalo iSCSI Connection Tool
1
Open the Buffalo iSCSI Connection Tool.
2
Select the TeraStation name from the drop-down menu of "Target" and click Register iSCSI Device.
71