Changing The Ip Address; Iscsi Connection Tool - Buffalo TeraStation TS3400D User Manual

Changing the IP Address

1
Click the
2
Click the TeraStation icon while holding down the control key, then choose Configure - IP Address.
3
Uncheck "Use DHCP"; enter the desired settings and the administrator password, then click Apply.
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,
initialize all settings with the init button on the TeraStation.
Local loopback address: 127.0.0.1, 255.255.255.0
Network address: 0.0.0.0, 255.255.255.0
Broadcast address: 255.255.255.255, 255.255.255.0
The IP address range from 224.0.0.0 to 255.255.255.255

iSCSI Connection Tool

The iSCSI Connection Tool is a Windows utility that lets you use the TeraStation as an iSCSI drive.
To launch it, click Start - All Programs - BUFFALO - iSCSI Connection Tool - iSCSI Connection Tool.
icon in the Dock to start NAS Navigator2.
201