Table of Contents
Advertisement
6
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
Changing the RAID Mode While Adding a Drive
Select the drive you want to add to the RAID array and choose the mode for the array. Enter the "Confirm Operation"
number and click OK.
RAID Scanning
RAID maintenance scans your RAID array for bad sectors and if it finds any it automatically repairs them. RAID 1,
RAID 10, RAID 5, and RAID 6 arrays are supported. For best results, run RAID maintenance regularly.
1
In Settings, click Drives.
2
Move the RAID scanning switch to the
3
Click
to the right of "RAID Scanning".
4
Click Edit.
5
Select when to run the scan and click OK.
Notes:
• Check "Immediately" to run RAID maintenance immediately.
• To stop a RAID scan, click Cancel RAID Scan.
position to enable RAID scanning.
44
Hide quick links:
Advertisement
Table of Contents
