Changing the RAID mode while adding a drive:
Select the drive you want to add to the RAID array and choose the mode for the array. Enter the "Confirm Operation"
number and click OK.
RAID Scanning
RAID maintenance scans your RAID array for bad sectors and if it finds any it automatically repairs them. RAID 1, RAID 10,
RAID 5 and RAID 6 arrays are supported. For best results, run RAID maintenance regularly.
1
In Settings, click Drives.
2
Click the
icon to the right of "RAID Scanning".
3
Click Edit.
4
Select the schedule for running RAID maintenance, then click OK.
Notes:
• Check "Immediately" to run RAID maintenance immediately.
• To stop a RAID scan, click Cancel RAID Scan.
5
Move the RAID scanning switch to the
position to enable RAID scanning.
40