Download  Print this page

Components; Pre-operation Checks - Makita EG241A Instructions For Use Manual

Eg series.
Hide thumbs

Advertisement

2. COMPONENTS

(See Fig.
)
NOTE
Please refer to the illustrations on the back page
of the front cover or back cover for Fig.
indicated in the sentence.
EG241A, EG321A, EG321AE,
EG441A, EG441AE (See Fig.
❶ RECOIL STARTER
❷ RECOIL STARTER HANDLE
❸ FUEL STRAINER (FUEL VALVE)
❹ FUEL TANK
❺ ENGINE SWITCH
❻ CONTROL PANEL
❼ OIL GAUGE (OIL FILLER)
❽ OIL DRAIN PLUG
❾ FUEL GAUGE
TANK CAP
SPARK PLUG CAP
CHOKE LEVER
AIR CLEANER
EXHAUST OUTLET
MUFFLER COVER
EG601A, EG601AE, EG671A, EG671AE
(See Fig.
-②)
❶ RECOIL STARTER
❷ RECOIL STARTER HANDLE
❸ FUEL STRAINER (FUEL VALVE)
❹ TANK CAP
❺ ENGINE SWITCH
❻ CONTROL PANEL
❼ OIL GAUGE (OIL FILLER)
❽ OIL DRAIN PLUG
❾ FUEL TANK
FUEL GAUGE
CHOKE LEVER
SPARK PLUG CAP
AIR CLEANER
MUFFLER
EXHAUST OUTLET

3. PRE-OPERATION CHECKS

(See Fig.
1. CHECK ENGINE OIL (See Fig.
to
Before checking or re¿ lling oil, be sure generator is
located on stable and level surface with engine
stopped.
Remove oil ¿ ller cap and check the engine oil level.
-①)
(See Fig. -①)
❶ OIL GAUGE
❷ OIL FILLER
❸ UPPER LEVEL
❹ LOWER LEVEL
If oil level is below the lower level line, re¿ ll with
suitable oil (see table) to upper level line. Do not
screw in the oil ¿ ller cap when checking oil level.
(See Fig. -②)
❶ UPPER LEVEL
❷ LOWER LEVEL
Change oil if contaminated.
(See "How-To" Maintenance.)
Recommended engine oil:
Use 4-stroke automotive detergent oil of API service class
SE or highergrade (SG, SH or SJ is recommended).
SAE 10W-30 or 10W-40 is recommended for general,
all-temperature use.
If single viscosity oil is used, select the appropriate
viscosity for the average temperature in your area.
Single grade
Multigrade
Ambient
temperature
)
Oil capacity (Upper level) :
EG241A . . . . . . . . . . . . . . . . . . . . . . . . 0.6
EG321A, EG321AE . . . . . . . . . . . . . . 0.6
EG441A, EG441AE . . . . . . . . . . . . . . 1.0
EG601A, EG601AE . . . . . . . . . . . . . . 1.2
EG671A, EG671AE . . . . . . . . . . . . . . 1.2
5W
10W
20W
10W-30
-①,②)
EN
FR
DE
NL
ES
IT
PT
GR
(L)
NO
SE
FI
DK
RU
#20
#30
#40
10W-40
5

Advertisement

Chapters

Table of Contents

   Also See for Makita EG241A

This manual is also suitable for:

Eg321aEg441aeEg601aEg601aeEg671aEg671ae ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: