Terminal - Eiki EK-501W Owner's Manual

Name and function of your projector

Terminal

1
9
VIDEO
VOL+
VIDEO
VOL+
18
LAN
Connect network cable to this port for con-
trolling and operating your projector via
network.
VIDEO IN
Connect video output signal to this terminal.
S-VIDEO IN
Connect S-VIDEO output signal of video
device to this terminal.
VGA IN
Connect output signal from computer to this
terminal.
MONITOR OUT
Transmit signals from
when your projector is acting as a display
output.
R(PR)/G(Y)/B(PB)/H(HV)/V
– Connect RGBHV format (5-core) signals to
terminal
R/G/B/HS/VS
– Connect component signals to Y, Pb, Pr
terminal respectively.
HDMI
Connect HDMI digital output signals to this
terminal.
DVI-D IN(HDCP)
Connect DVI digital output signals to this
terminal.
AUDIO (Video)
Connect audio signal from
16
2 3 4 5
VGA
IN
MONITOR OUT
VGA
IN
MONITOR OUT
S-VIDEO AUDIO AUDIO
IN1 OUT
S-VIDEO AUDIO AUDIO
10 IN1 11 OUT 12
to other displays
respectively.
to this terminal.
6
P/PR G/Y B/PB H/HV
P/PR G/Y B/PB H/HV
AUDIO RS-232C R/C
IN2 IN
AUDIO RS-232C R/C
IN2 13 14 IN
AUDIO (S-Video)
Connect audio signal from
AUDIO IN1/AUDIO IN2
– Connect audio signals for device
to AUDIO IN1
– Connect audio signals for device
to AUDIO IN2
AUDIO OUT
Output audio signals to amplifier or other audio
equipment.
SERIAL
Connect serial cable to this terminal when
using RS232 device to control or operate your
projector.
REMOTE IN
Connect wired remote controller to this termi-
nal. Connection of a wired remote controller
will disable the wireless one.
REMOTE OUT
Transmit wired remote controller signals of
to another projector when a wired remote
controller is used.
AUDIO/DVI-D
Connect audio signals of DVI equipment to this
terminal.
Anti-theft slot
Power cord connector
7 8
DVI-D
V
DVI-D
V
R/C AUDIO
OUT
R/C AUDIO
OUT 15 16
to this terminal.
17