Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Eiki EK-350U
Summary of Contents for Eiki EK-350U
- Page 1 Owner's manual Multimedia Projector EK-350U EK-351W V1.0...
-
Page 2: Table Of Contents
Maintenance Operation color to the wall color from the preset four (This function is disable on EK-350U) Regular maintenance Basic operation colors. Status indicator ..........71 Power on the projector.......28... -
Page 3: Safety Operation Guideline
Safety operation guideline Safety operation guideline Safety instructions Notes This document and the projector employ certain symbols to illustrate how to use the projector safely. They are described below: Please get yourself familiar with them before going through this Caution document. - Page 4 Safety operation guideline Safety operation guideline Note: Note: Precautions on location of the projector: Precautions on using the projector: ● Place the projector in a proper location or it may result in fire. ● DO NOT project the same image for long time as residual images may be left in the panel. This is a property of LCD panel.
- Page 5 360° Safety operation guideline Safety operation guideline Air ventilation The projector supports 360° projection vertically and horizontally. Openings in the casing are designed for ventilation and overheating prevention. DO NOT block or 360° 360° cover these openings to keep the projector in normal operation and from overheating. Note: Heat exhaust at the air outlet.
-
Page 6: Compliance
Model Number : EK-350U, EK-351W Trade Name : EIKI Precautions on dealing with the pro- Responsible party : EIKI International, Inc. -
Page 7: Accessories
Accessories Remote Control with batteries Quick Start Guide AC Power Cord (AA or LR6) US type x 1 Euro type x 1 Safety Information VGA Cable Overview This chapter presents names and functions of individual component. -
Page 8: Name And Function Of The Projector
Name and function of the projector Name and function of the projector Front/top Control Panel 157.6 • Power / Stand-by Power on or off the projector LED indicator (Power / Status / Filter) ① Remote controller receiver (front) ② • Left / Right / Up / Down Focus ring ③... -
Page 9: Terminal
Name and function of the projector Name and function of the projector Terminal Remote controller VGA 1 Select VGA 1 input source. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ COMPONENT Select Component input source. INPUT Open or close the INPUT menu. AUTO Optimize a computer image automatically Arrow... -
Page 10: Install Battery Of Remote Controller
Name and function of the projector Name and function of the projector IMAGE Install battery of remote controller Select image mode. D.ZOOM+ Open the battery cover. Zoom in projected image. FREEZE Freeze projected images. D.ZOOM- Zoom out projected image. SCREEN Select screen size. -
Page 11: Set Up The Projector
● Values shown in figure below are approximates only. They may differ from the actual ones. 300" 200" 150" 100" 40" Installation EK-350U / EK-351W (16:10) Unit:cm 40" 100" 150" 200" 300" Screen size... -
Page 12: Lens Shift Adjustment
Installation Connection to equipment Connection to computer Lens shift adjustment The electric lens shift function may adjust the lens in all four directions. Cables used for connection: This function enables easy image position adjustment. ● VGA cable ● USB cable* ●... -
Page 13: Connection To Video Equipment
Connection to equipment Connection to equipment Connection to video equipment Connection to audio equipment External audio equipment Audio output Audio Audio output input (R) (L) S-video Component Video output output output Note: The left and right channels are combined Audio Audio cable Audio cable Video... -
Page 14: Connect The Ac Power Cord
Connection to equipment Connect the AC power cord Standard voltage employed by the projector is AC 100-240V. It adapts to different input voltage automatically. The projector employs 2-phase power cord with neutral ground cable. Do not use any other type of power cords or you may face the risks of electric shock. -
Page 15: Power On The Projector
Basic operation Basic operation Power on the projector Power off the projector Power 1. Press the Power button at the control panel or the remote controller, the “Power off?” message displays. Power 2. Press the Power button again in 4 seconds after the “Power off?”... -
Page 16: Zoom / Focus Function
Adjust the projected image when the projector linear- *for WUXGA model ity is uneven or the projected images bent vertically H/V Keystone and horizontally. (*This function is unavailable of EK-350U) Corner correction Reset value Adjustable pad The correction values will be restored to the factory Reset value defaults. -
Page 17: Input Select
Basic operation Input selection Input select Remote controller operation Remote control Use the remote controller for common operations. Direct operation Press HDMI 1, HDMI 2, VGA 1, VGA 2, VIDEO, HDBase T, COMPONENT or USB-A on the Blank (BLANK) remote control as input source. HDMI 2 Press the BLANK button on remote controller VGA 2... -
Page 18: Menu Operation
Input selection Basic operation Remote control How to use the OSD Select it when the video input signal S-video is connected to VGA IN 2(YPbPr/ S-VIDEO) terminal via S-Video to Main menu Sub menu VGA adaptor cable HDMI 2 VGA 2 Display HDBaseT HDMI 1... - Page 19 Basic operation OSD Setting-Display Menu item overview Auto PC Adjusting The Auto PC Adjusting function may get Total Dots, Horizontal and Vertical position, Display area H, Main menu Sub menu and Display area V aligned with computer input. Remote control Display ①...
- Page 20 Blue *** Edge blending software and its System 1024 x 768, 60Hz manual can be downloaded from EIKI website. See page 69 for usage of Edge blending. Note: ● The adjustment of Fine sync, H Position, V Position and H.Size is only for computer signal input.
-
Page 21: Color Adjust
OSD setting-Color Adjust (HDMI 1, HDMI 2, VGA 1, VGA 2, Me- OSD setting-Display mory Viewer, Network and USB Display signal) System Color Adjust The projector automatically tunes to various types of computers with its function of Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically de- Menu operation tects the signal format and tunes to project proper images without any additional setting. - Page 22 OSD setting-Setting OSD setting-Color Adjust (Video, Component and S-video signal) Color Adjust Setting The projector comes with convenient adjustment function. Menu operation 1 Press the MENU button on remote controller and the OSD displays. Press button to select 1 Press the MENU button on remote controller and the OSD displays. Press button select Setting icon, press button or OK button to confirm the selection.
- Page 23 OSD setting-Setting OSD setting-Setting Closed caption (Video signal only) Sound Setting Allows the subtitle to be displayed for the audio Adjust the volume. contents or other information. If the input source On start Standby mode Volume ..Press button to increase contains closed caption, you can enable this High land the volume, press...
- Page 24 OSD setting-Expand OSD setting-Expand Expand Keystone Keystone menu This function is used to store or reset the Select the Expend menu to set up other functions of the projector. keystone correction when the AC power cord is 1. Press the MENU button on remote controller and the OSD displays. Press button to select Expend unplugged.
- Page 25 OSD setting-Expand OSD setting-Expand Logo Curved correction (for EK-351W only) This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code Adjust when the linearity is not uniform or the vertical and horizontal lines are distorted. lock and Logo PIN code change functions.
- Page 26 OSD setting-Expand OSD setting-Expand Security Security Power management This function allows you to use the PIN code Power management For reducing power consumption as well as lock and PIN code change functions to set the Expend maintaining the LED light source life, the Power security for the projector operation.
- Page 27 OSD setting-Expand OSD setting-Expand Test Pattern This function is used to set the internal test Test Pattern (3) When DHCP is setting as On, IP address, signal: Gray scale 1, Gray scale 2, Gray scale Network setting Subnet, Gateway and DNS will be obtained 3, Gray scale 4, Color bar, Red, Green, Blue, DHCP Expend...
-
Page 28: Memory Viewer
OSD setting-Memory Viewer OSD setting-Info. Memory Viewer Information The Memory Viewer function makes it possible to project the pictures which are stored in the USB The information menu is used to the detect signal of projected image and running state. memory when the USB memory is inserted into the projector Menu operation 1 Press MENU button on the remote control to display screen menu. -
Page 29: Lan Control
Description on network control operation LAN control Function : PC controls projector via LAN. Preparation: 1. Equipments: PC, projector, cables 2. Connection procedures: Connect the projector to routers or switches of the LAN by direct on cross cable. If it fails to connect PC and projector by parallel cable, please switch to cross cable as suggested. - Page 30 Description on network control operation Description on network control operation 4. Activate the Web browser in the personal computer. "System Status" page Display the status of the projector for the following items. 5. Enter the IP address set by the projector into the URL input field of the Web browser. 6.
- Page 31 Description on network control operation Description on network control operation ① Brightness ④ Color "Network Setup" page Adjusts the brightness of the projected image. Adjusts the color saturation of the projected image. ② Contrast Adjusts the contrast of the projected image. ⑤...
- Page 32 Description on network display operation Description on network display operation Play/Pause ② Network Display function Play or pause the selected image. 1. PwPresenter software: when "Network" is selected in Source Select, you can project the current ③ Choose capture mode computer images via network.
-
Page 33: Memory Viewer Function
Description on using Memory Viewer function Description on network display operation Memory Viewer function Multicast Setting Setting Sound volume, Bandwidth and Capture The Memory Viewer function is used to project the pictures which are stored in the USB memory when rate etc. -
Page 34: Usb Display Function
Description on using Memory Viewer function Description on using USB display function USB Display function Play the PDF Playing the PDF file. The USB Display function is used to project the image from the computer which is connected to Micro- press ▲▼◄►... -
Page 35: Edge Blending
Adjustment: The color and effect of the overlay edge can be adjusted with the Edge Blending software. The Edge Blending Software and its manual can be downloaded from EIKI website. Termination of the USB display URL: http://www.eiki.com When terminate the USB display, remove the USB cable directly. - Page 36 Regular maintenance Status light indicator The STATUS indicator shows status of projector protection function. Check STATUS and POWER indicator for good maintenance operation. Note: Unplug the AC power cord in case of any abnormality as it may lead to fire or electric shock. The projector turns off and the STATUS indicator flashing orange.
-
Page 37: Reset The Filter Counter
Regular maintenance Regular maintenance Clean the projector when it is contaminated by foreign matter or its display effects are get- Reset the filter counter ting worse. 1 Press MENU button and the OSD displays. Press button to select Expend menu, press button or OK. -
Page 38: Appendix
Appendix Troubleshooting Check the following before calling the dealer or service center: Troubleshooting Solution Power on failure – Plug the power cord of the projector in an AC socket. – Make sure the POWER indicator turns red. – Restart the projector until the POWER indicator turns red. It indicates the projector is ready for power on again. -
Page 39: Light Indicator Status
Appendix Appendix Light indicator status Abnormal color – Check the setting mode of signal, color system, image system, or computer system. Check light indicator to learn status of the projector. – Make sure Blackboard mode is not selected in Image selection. Some operations are –... -
Page 40: Compatible Computer Screen
Appendix Appendix Terminal configuration Compatible computer screen The projector is designed to accept every analog computer signal below Dot Clock 160MHz and VGA IN / Component / S-Video Terminal (D-sub 15) digital computer signal below Dot Clock 150MHz. Red/Pr/S-C input ----- See table below for details on resolution and relevant frequency. -
Page 41: Menu Tree
H/V Keystone Expand DICOM Corner correction Keystone Colorboard Color adjust *This function is disable *Curved correction Contrast 0-63 on EK-350U Brightness 0-63 Reset value Color temp High/Mid/Low *This function is disable Logo select Default/*User/Off Default 0-63 PC Input on EK-350U... - Page 42 Appendix Appendix Main menu Sub-menu Setting Remarks Main menu Sub-menu Setting Default value Remarks PIN code lock On/Off Input Security H- sync. Freq. PIN code change V- sync. Freq. Ready Info. Light source status Shut down Power Ready Light source counter management Timer Power management...
-
Page 43: Technical Specifications
Cd(vi) PBDE LCD resolution LCD system 0.76" TFT ○ ○ ○ ○ ○ × LCD resolution EK-350U:1920x1200 / EK-351W:1280x800 ○ ○ ○ ○ ○ Optical components Compatible signals × Color standard PAL, SECAM, NTSC, NTSC4.43, PAL-60, PAL-M and PAL-N ○... -
Page 44: Dimensions
Appendix Appendix PIN code memorandum Dimensions Unit: mm Screw Holes for Ceiling Mount Write down the PIN code in the blank below and keep it, If you forgot or lost the number and unable to Screw: M4 operate the projector, contact the service center. Depth: 10.0 Factory default PIN code 111* 143.0... - Page 45 E-Mail: info@eiki.de Fax: +420 241-409-435 E-Mail: info@eiki.cz China South East Asia EIKI (Shanghai) Co., Ltd. EIKI Industrial (M) Sdn Bhd LAKESIDE OASIS MIDDLE RING No. 11, Nouvelle Industrial Park, BUSINESS CENTRE Lorong Teknologi B, Taman Sains Block 1,Room 606, Selangor 1, Kota Damansara PJU5,...