Name and function of your projector
Install battery of remote controller
Open the battery cover.
Insert a new battery in it.
Two AA batteries
Place your batteries with its
anode and cathode (+ and -)
in correct direction. Keep both
poles in good connection to the
contacts within the compartment.
Put the cover back.
Please follow the following rules for safety operation:
●
●
●
●
●
●
●
●
●
Use two of AA or LR6 alkaline batteries.
Replace both batteries at the same time.
Do not mix new and old batteries as one pair.
Keep your remote controller away from water or other liquids.
Do not expose your remote controller to environments with high
humidity or temperature.
Do not drop your remote controller.
In case of any battery solution leaking in the compartment, clear it
thoroughly before placing new batteries in it.
Using battery of other types than what specified on this manual may
lead to risks of explosion.
Please dispose your old battery by following instructions given in tag
of the battery or local regulations.
19