High Land; Filter Counter; Warning Log; Factory Default - Eiki EK-501W Owner's Manual

High Land

You may set up fan control function in the Setting menu. Set up fan speed according to the altitude
your projector is operating.
Off .......... Normal speed Set this function to Off when your projector is in use in environment of low
altitude.
On .......... The fan runs at speed faster than that of the Off mode. Set this function to On when your
projector is in use in environment of high altitude, as its cooling effect gets lower.
Note:
Set this function to On when your projector is in use in environment of altitude above 1400 meter.

Filter counter

Select this function to set up cleaning interval of the filter.
A filter warning message displays to remind you cleaning the filter when the cleaning time is due.
Please reset and set up the timer after the filter is cleaned. The filter warning message closes only
after the filter counter is reset.
Filter counter: Time the filter has been in service.
Timer: Filter cleaning cycle.
Reset the filter counter: Reset the filter counter
after is has been cleaned.

Warning Log

This function keeps abnormal operation of your
projector during its use for troubleshooting. It
contains the latest 9 warning messages in time
sequence.
Note:
Records contained in the log will be erased
after a Factory Default reset.

Factory Default

This function resets all your settings to Factory Default except the user Logo screen, PIN Code
lock, lamp use time and filter counter.
3 / 3
㉓

IRIS

Setting
On
Setting
Filter counter
Filter counter
Timer
Filter counter reset
IRIS
Select this function to change image contrast.
On .......... Enable IRIS function for better image
contrast.
Off .......... Disable IRIS function.
Setting 设置
1H
200H
55