Image Adjust - Eiki EK-501W Owner's Manual

Image Adjust

1 Press the MENU button on remote controller and the OSD displays. Press
the Image Adjust icon, press
2 Press button to point to required item, press
tion.
3 Press button to adjust settings, then press OK button; or press
in the pop-up adjustment menu.
Contrast
Brightness
Color
Tint
White balance
(Red)
White balance
(Green)
White balance
(Blue)
Sharpness
Gamma
Noise
Reduction
Progressive
46
Input source (VIDEO signals)
button or OK button to confirm your selection.
Contrast
Brightness
Color
Tint
Red
Green
Blue
Sharpness
Gamma
Noise reduction
Progressive
Press button to decrease contrast and
Press button to decrease brightness, press
Press button to decrease color saturation and
Press button to adjust image to required tint.
Press button to lighten the red color and
Press button to lighten green tint and
Press button to lighten the blue color and
Press button to soften image and
Press button to adjust gray scale for better contrast balance.
Select Noise Reduction to cut snow interference to your screen for even
smoother and clearer image.
Display lined video signal as stepped image. You may select one of the
following according to type of signal:
Off ......................Disable the function
L1.......................Project dynamic image
L2.......................Project still image
Quality image..... For movie viewing This function enables your projector to
button or OK button to confirm your selec-
Image adjust
设置
treat image for high quality representation with less image
distortion.
button to select
button to adjust settings
32
32
32
32
32
32
32
8
8
On
L1
button to increase it.
button to increase it.
button to increase it.
button to darken it.
button to darken it.
button to darken it.
button to sharpen it.