Terminal - Eiki EK-355UK Owner's Manual

Name and function of the projector

Terminal

VIDEO IN
①
Connect video output signal to this terminal.
Micro-USB
②
The terminal is to use the USB display function,
when connected the projector to computer with
USB cable
VGA IN 1
③
Connect output signal from computer to this
terminal.
VGA OUT
④
Transmit signals from ③ or ⑤ to other displays
when the projector is acting as a output display.
VGA IN 2 / YPbPr / S-VIDEO
⑤
Connect output signal from computer, YPbPr or
S-Video to this terminal.
HDMI 1
⑥
Connect HDMI digital output signals to this
terminal.
HDMI 2(MHL)
⑦
Connect HDMI digital output signals or MHL
digital output signals to this terminal.
USB
⑧
When using the Memory Viewer function, insert
the USB Flash Drive to this terminal directly.
16
① ② ③ ④
⑩ ⑪ ⑫ ⑬
⑤ ⑥
⑭ ⑮
LAN
⑨
Connect network cable to this port for controlling
and operating the projector via network.
AUDIO (L/R)
⑩
Connect audio signals to this terminal.
Kensington Security Slot
⑪
This slot is for a Kensington lock used to deter
theft of the projector.
* Kensington is a registered trademark of ACCO
Brands Corporation
RS232C
⑫
Connect serial cable to this terminal when using
RS232 device to control or operate the projector.
Power cord connector
⑬
AUDIO IN
⑭
Connect audio signals
AUDIO OUT
⑮
Output audio signals to amplifier or other audio
equipment.
Speaker
⑯
⑦ ⑧ ⑨
⑯