Auto Pc Adjusting - Eiki EK-501W Owner's Manual

Input source (Computer signals)

Auto PC Adjusting

The Auto PC Adjusting function may get Total Dots, Horizontal and Vertical position, Display area H,
and Display area V aligned with computer input.
Auto PC Adjusting
1 Press the MENU button on remote controller
and the OSD displays. Press
select PC adjustment icon. Press
OK button and the PC adjust menu displays.
2 Press button to point to Auto PC Adj. op-
tion, press OK button to confirm your choice.
Note:
● Total Dots, Horizontal and Vertical position of certain computers may be fully adjusted by
the Auto PC Adjusting function. In case the post-adjustment image still looks incorrect,
adjust it again manually.
● The Auto PC Adjusting function will be disabled once 480i, 575i, 480p, 575p, 720p, 1035i
or 1080i has been selected in the system menu.
38
button to
button or
PC adjust
设置
Auto PC adj.
Fine sync
Total dots
Horizontal
Vertical
PC adjust
设置
Clamp
Auto PC adj.
Display area H Fine sync
Total dots
Display area V
Horizontal
Vertical
Reset
Clamp
Display area H
Mode free
Display area V
Reset
Store
Mode free
Store
16
0
0
0
1
16 0
0
1
0
0
1
0
1