Terminal - Eiki EK-601LUL Owner's Manual

Name and function of your projector

Terminal

②
①
① VIDEO IN
Connect video output signals to this terminal.
② AUDIO (MONO)
For a mono audio signal, connect it to this
terminal.
③ AUDIO OUT
Output audio signals to amplifier or other audio
equipment.
④ AUDIO IN
"Line out" to "AUDIO OUT" terminal from input
audio signals. (Speakers are not equipped)
⑤ VGA IN
Connect output signal from computer to this
terminal.
⑬
20
③ ④ ⑤ ⑥
⑭
⑦ ⑧
RS-232C
⑥ VGA OUT
Transmit signals from ⑤ to other displays
⑦ HDMI 1 / 2 IN
Connect HDMI digital output signals to this
terminal.
⑧ USB-B IN
The terminal is to use the USB display function,
when connected the projector to computer with
USB cable
⑨ USB-A IN
When using the Memory Viewer function, insert
the USB memory directly to this terminal.
⑩ LAN
Connect network cable to this port for controlling
and operating your projector via network.
⑪ IR receiver
Received the IR signal from remote controller.
⑫ RS232C
Connect serial cable to this terminal when using
RS232 device to control or operate your projector.
⑬ Power cord connector
⑭ Kensington Security Slot
This slot is for a Kensington lock used to
deter theft of the projector.
* Kensington is a registered trademark of
ACCO Brands Corporation
⑨
⑩
⑪
⑫
RS-232C