Screen Size Adjustment - Eiki EK-501W Owner's Manual

Screen size adjustment

Your projector comes with screen size adjustment function for you to display required image size.
1. Press the MENU button on remote controller and the OSD displays. Press
Screen icon, press
2. Press button to point to required item and press OK button to confirm your selection.
Normal
Full
Wide
Custom
Normal
Full
Wide
Custom
Note:
● If no signals was detected, the Auto setting will be accepted automatically and the adjustment
pop-up menu disappears.
● Adjustment range of the horizontal /vertical position ratio and position varies with input signal.
Input source (VIDEO signals)
button or OK button to confirm your selection.
Screen
设置
Select this function to maintain the aspect ratio of the projected image
consistent with its input source.
Project image in full screen.
Provide image in aspect ratio of 16:9 by expanding image width propor-
tionally.
Adjust screen aspect ratio and position manually.
Press button in customization area and Custom options display. Press
button to select required items.
Horizontal ratio/vertical ratio:
Adjust horizontal and vertical screen ratio.
The aspect ratio option will be disabled when the horizontal and
vertical screen ratio is set to On. The vertical ratio option dims and
appears unavailable. Adjust the horizontal ratio and the screen size
is adjusted according to the aspect ratio.
Horizontal / Vertical position:
Adjust horizontal /vertical position of image.
Common: Save adjustment ratio applicable with all input. Point to Com-
mon and press OK button to display a confirm menu. Press
Yes then OK to save your ratio settings. The saved ratio will
be used when Custom is selected as user.
Reset: Reset your adjustments to its initial status. Point to Reset and
press OK button to display a confirm menu. Point to Yes and
press OK button to reset.
button to select
Screen
47