Terminal - Eiki EK-351WST Owner's Manual

Name and function of the projector

Terminal

②
①
AUDIO (L/R)
①
Connect audio signals to this terminal.
VIDEO IN
②
Connect video output signal to this terminal.
VGA IN 1
③
Connect output signal from computer to this
terminal.
VGA IN 2 / YPbPr / S-VIDEO
④
Connect output signal from computer, YPbPr or
S-Video to this terminal.
VGA OUT
⑤
Transmit signals from ③ or ⑤ to other displays
when the projector is acting as a output display.
LAN
⑥
Connect network cable to this port for controlling
and operating the projector via network.
HDMI 1
⑦
Connect HDMI digital output signals to this
terminal.
USB-B
⑧
The terminal is to use the USB display function,
when connected the projector to computer with
USB cable
③ ④
⑩ ⑪
⑤ ⑥
⑫ ⑬
USB-A
⑨
When using the Memory Viewer function, insert
the USB Flash Drive to this terminal directly.
RS232C
⑩
Connect serial cable to this terminal when using
RS232 device to control or operate the projector.
AUDIO IN
⑪
Connect audio signals
AUDIO OUT
⑫
Output audio signals to amplifier or other audio
equipment.
Remote Control receiver (rear)
⑬
Operation the projector by remote control.
HDMI 2(MHL)
⑭
Connect HDMI digital output signals or MHL digital
output signals to this terminal.
Kensington Security Slot
⑮
This slot is for a Kensington lock used to deter
theft of the projector.
* Kensington is a registered trademark of ACCO
Brands Corporation
⑦ ⑧ ⑨
⑭ ⑮
15