Adjustment Pad; Keystone Adjustment - Eiki EK-501W Owner's Manual

Adjustment pad

You may use the adjustment leg to raise your pro-
jector up to 5.0 degree.
Turn the pad to tilt your projector to required height.
To raise your projector, turn both pads clockwise.
To lower down your projector or close the pad, turn
both pads counterclockwise.
You may use the auto setup function to adjust your
projector's keystone distortion automatically or do
this with the remote controller or OSD menu manu-
ally.

Keystone adjustment

You may adjust keystone distortion of image in your pro-
jector with the H/V and Corner keystone adjustment.
Follow steps below to adjust keystone distortion of pro-
jected image manually.
Press the KEYSTONE button on your remote controller.
The keystone adjustment dialog box displays, press
button to adjust keystone distortion. You may
save your settings for keystone adjustment.
Press
narrow upper part
of the image
H/V keystone
adjustment
Press
to adjust keystone
distortion at the
upper left corner
Corner key-
stone adjust-
ment
Keystone adjustment
● The arrow mark looks white when there is no keystone adjustment in existence.
● The arrow mark indicating the adjustment direction turns red.
● The arrow mark disappears when the maximum adjustment limit reaches.
● The keystone adjustment will be canceled if you press the keystone adjustment button when it is
displaying.
● The adjustable range is subject to source of signal input.
Basic operation
button to Press
narrow lower part
of the image
button Press
to adjust key-
stone distortion
at the upper right
corner
button to Press
reduce height to
the left.
button Press
to adjust key-
stone distortion
at the lower right
corner
Adjustable
pad
Keystone
adjustment
button to Press
reduce height to
the right.
button Press
button to adjust
keystone distor-
tion at the lower
left corner
button to
31