Name and function of the projector
Terminal
VIDEO IN
①
Connect video output signal to this terminal.
Micro-USB
②
The terminal is to use the USB display function,
when connected the projector to computer with
USB cable
VGA IN 1
③
Connect output signal from computer to this
terminal.
VGA OUT
④
Transmit signals from ③ or ⑤ to other displays
when the projector is acting as a output display.
VGA IN 2 / YPbPr / S-VIDEO
⑤
Connect output signal from computer, YPbPr or
S-Video to this terminal.
HDBaseT
⑥
Connect to this terminal through a network cable
to achieve the HDBaseT function.
HDMI 1
⑦
Connect HDMI digital output signals to this
terminal.
HDMI 2(MHL)
⑧
Connect HDMI digital output signals or MHL
digital output signals to this terminal.
16
①
②
③
④
⑪
⑫
⑬
⑭
⑤
⑥
⑦
⑮
⑯
USB
⑨
When using the Memory Viewer function, insert
the USB Flash Drivesy to this terminal directly.
LAN
⑩
Connect network cable to this port for controlling
and operating the projector via network.
AUDIO (L/R)
⑪
Connect audio signals to this terminal.
Kensington Security Slot
⑫
This slot is for a Kensington lock used to deter
theft of the projector.
* Kensington is a registered trademark of ACCO
Brands Corporation
RS232C
⑬
Connect serial cable to this terminal when using
RS232 device to control or operate the projector.
Power cord connector
⑭
AUDIO IN
⑮
Connect audio signals
AUDIO OUT
⑯
Output audio signals to amplifier or other audio
equipment.
Speaker
⑰
⑧
⑨
⑩
⑰