Eiki EK-501W Owner's Manual page 7

Note:
Precautions on using your projector:
● DO NOT project the same image for long time as residual images may be left in the panel.
This is a property of LCD panel.
● Use power as indicated in tags attached to your projector. If you have doubts over available
power type, consult your dealer or local power company first.
● DO NOT open or remove the casing for maintenance as this may lead to electric shock or
other damages. Call qualified maintenance personnel in case of any maintenance require-
ments.
– In case of the following, unplug the power cord and call qualified maintenance personnel
for service immediately:
a. Damaged or broken power cord or plug
b. Liquid splashed in your projector
c. Your projector exposed to rain or water
d. If your projector fails to work as expected by following operation instructions, adjust it ac-
cording to given instructions. Other invalid operations may damage your projector, which
requires the technician to spend more time before returning it back to normal.
e. The projector falls off to ground or its casing is damaged.
f. In case of any abnormal change in your projector during its use, then maintenance ser-
vices would be required.
● In case components replacement is required, make sure the replacements have been ap-
proved by the manufacturer and features the same with the one being replaced. Use of
unauthorized parts may lead to fire, electric shock or personal injury.
● After the completion of maintenance or repair work, get the maintenance personnel to run
routine safety check to ensure your projector's safety operation status.
Information for users in the European Union
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a
domestic environment.
NOTE FOR CUSTOMERS IN THE US
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED
OF ACCORDING TO LOCAL STATE OR FEDERAL LAWS.
Safety operation guideline
Directive 2009/125/EC.
7