Eiki EK-501W Owner's Manual page 70

Light indicator status
Check light indicator to learn status of your projector.
Light indicator
POWER STATUS
?
?
......Green
.....Flashing green
70
Appendix
FILTER
Your projector is in Off status (without AC power supply).
Your projector is in standby status. Press Standby button to turn it on.
Your projector is in normal status.
It is ready for standby or the lamp is cooling. You may power on your
projector only after the lamp is fully cooled and the POWER light
indicator stops flashing.
Your projector is in Ready mode.
Your projector detects abnormal situation and cannot power on. Un-
plug the AC power cord and connect it again before powering on your
projector. If it powers off again, please unplug the cord and call your
dealer or service center for maintenance or inspection. Do not let it
continue operating as this may lead to electric shock or fire.
Your projector detects lamp abnormality and cools down.
Your projector detects lamp abnormality and switches into standby
mode.
Your projector cannot power on, as its internal temperature is too
high. You may power it on after it is fully cooled, temperature backs to
normal, and the POWER light indicator turns red.
You may power is fully cooled with temperature backs to normal.
The lamp cover is not fully closed.
The filter requires cleaning
......Red
......Flashing red
?
Status of your projector
......Turns on
......Flashing
......Off