Eiki EK-110U Owner's Manual
  1. Manuals
  2. Brands
  3. Eiki Manuals
  4. Projector
  5. EK-110U
  6. Owner's manual

Eiki EK-110U Owner's Manual

Hide thumbs Also See for EK-110U:
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
EK-110U
EK-100W
EK-101X
EK-102X

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EK-110U and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Eiki EK-110U

Summary of Contents for Eiki EK-110U

  • Page 1 OWNER'S MANUAL EK-110U EK-100W EK-101X EK-102X...

  • Page 2: Features And Design

    Features and Design This Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 10.7 million colors, and matrix liquid crystal display (LCD) technology. Simple Computer System Setting LAN Network Function This projector is loaded with the wired LAN The projector has the Multi-scan system to...

  • Page 3: Table Of Contents

    Contents Features and Design ............. 2 Setting ..............38 Contents ................ 3 On start ..............38 Safety Instructions ............4 Standby mode ............38 Safety Guide ..............5 High land ..............39 Air circulation ............6 Lamp control ............39 Moving the projector ..........6 Cooling fast ............39 Installing the projector properly .........

  • Page 4: Safety Instructions

    Safety Instructions Please read this manual completely before installing Safety precautions and operating the projector. The projector provides many convenient features Caution: ● The projector must be grounded. and functions. Proper operation may enable you to ● Do not expose the projector to raindrops fully utilize the features and keep it in good condition.

  • Page 5: Safety Guide

    Safety Guide All the safety and operating instructions should be Do not install the projector near the ventilation duct of read before the product is operated. air-conditioning equipment. Read all of the instructions given here and retain them This projector should be operated only from the type for later use.

  • Page 6: Air Circulation

    Safety Guide Air circulation – Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage Vents in the cabinet are provided for ventilation. to the projector. For more information about To ensure reliable operation of the product and transporting the projector by courier or any to protect it from overheating, these openings...

  • Page 7: Compliance

    If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : EK-100 series Trade Name : EIKI Responsible party : EIKI International,Inc. Address : 30251 Esperanza Rancho Santa Margarita CA 92688-2132 Telephone No. : 800-242-3454 (949-457-0200) AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

  • Page 8: Accessories

    KEYSTONE IMAGE FREEZE PATTERN KEYSTONE IMAGE FREEZE PATTERN SCREEN LAMP MUTE INFO. SCREEN LAMP MUTE INFO. BLANK BLANK D.ZOOM VOLUME TIMER D.ZOOM VOLUME TIMER Accessories AC Power cord VGA cable Remote control with batteries Quick start guide (AAA or LR3) INPUT VIDEO HDMI...

  • Page 9: Part Names And Functions

    Part names and functions Front ① Remote control receiver (front) ④ ③ ② ① ② Lamp cover ③ Focus adjust ring ④ Top control panel and indicator ⑤ Filter ⑥ Projector Lens ⑤ ⑥ ⑦ Zoom adjust ring Back ⑧ AC cord connector ⑨...

  • Page 10: Terminals

    Part names and functions Terminals ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ HDMI/ USB-A USB-B VGA IN 2 / VGA OUT AUDIO VIDEO IN HDMI RS-232C VGA IN 1 / YPbPr / S-VIDEO IN AUDIO IN ⑩ ⑪ ⑫...

  • Page 11: Top Control And Indicators

    Part names and functions Top control and Indicators ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ① MENU ⑤ POWER indicator(Refer to Page 76) Open or close the screen menu. - It lights red when the projector is in stand-by mode. - It lights green during normal operations.

  • Page 12: Remote Control

    Part names and functions Remote control ⑧  button - Select item or adjust the value in ② ① screen menu. - Select the image display area in digital zoom + mode. INPUT ④ ⑨ OK VIDEO HDMI ③ Enter the menu or select an item in ⑤...

  • Page 13: Install Remote Control Batteries

    Part names and functions Install remote control batteries ②Install new batteries. ① Open the battery ③ Put the cover cover. back. Two AAA batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment.

  • Page 14: Installation

    Installation Positioning the projector  Note: ● The brightness in a room has a great influence on picture quality. It is recommended to limit the ambient lighting in order to get the best image. ● All measurements are approximate and may vary from the actual sizes. XGA model: Screen size 30"...

  • Page 15: Connecting To Computer (Digital And Analog Rgb)

    Installation Connecting to computer (Digital and analog RGB) Cables used for connection: ● VGA cable ● Serial cable(crossover type)* ● HDMI cable* (*=Cables are not supplied with the projector) HDMI RS232 output output input/output output Serial HDMI cable cable cable cable HDMI RS232...

  • Page 16: Connecting To Video Equipment (Video, S-Video)

    Installation Connecting to video equipment (Video, S-Video) Cables used for connection: ● S-video cable** ● Component conversion cable* ● Video cable* (*=Cables are not supplied with the projector) (**=Dedicated cable is required and can be ordered through your dealer) S-video Component Video output...

  • Page 17: Connecting To Audio Equipment

    Installation Connecting to audio equipment Cables used for connection: ● Audio cable* (*=Cables are not supplied with the projector) External audio equipment Audio Audio Audio output output input (R) (L) Note: The left and right channels are combined when there is only the L(mono) is inserted.

  • Page 18: Connecting To Usb Device (Usb-A, Usb-B)

    Installation Connecting to USB device (USB-A, USB-B) Cables used for connection: ● USB-B cable* (*=Cables are not supplied with the projector) USB-A output USB-B cable USB-A device USB-A USB-B input input HDMI/ USB-A USB-B VGA IN 2 / VGA OUT AUDIO VIDEO IN HDMI...

  • Page 19: Connecting The Ac Power Cord

    Installation Connecting the AC power cord This projector uses nominal input voltages of 100–240V AC and it automatically applies to different input voltages. It is designed to work with a single-phase power system having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

  • Page 20: Basic Operation

    Basic operation Turn on the projector 1. Complete peripheral connections (with a computer, video,etc.) before turning on the projector. 2. Connect the projector’s AC power cord into the AC outlet. The POWER indicator turns red. 3. Press the POWER button on the top control or on the remote control.

  • Page 21: Turn Off The Projector

    Basic operation Turn off the projector 1. Press the POWER button on the top control or on the remote control, and "Power off?" appears on the screen. Power off ? 2. Then, press the POWER button again in 4 seconds. The POWER indicator starts to flash red, and the cooling fans keep running (You can select the fan noise and running speed).

  • Page 22: Adjust Zoom And Focus

    Basic operation Adjust zoom and focus ZOOM ring FOCUS ring Rotate the ZOOM ring to zoom in or zoom out (back) (Front) the image. Rotate the FOCUS ring to adjust the focus of the image. Auto setup function Top control This function is available just by pressing the AUTO button on the remote control or top control.

  • Page 23: Keystone

    Reset value Curved correction Adjusts when the linearity is not uniform or the vertical and horizontal lines are distorted. (This function is not avalible for EK-110U) Reset value Return the corrected values to the factory default values. ...

  • Page 24: Volume

    Basic operation Volume Top control Direct operation Volume Press the VOLUME +/- buttons on the remote control or top control to adjust the volume. Mute Press the MUTE button on the remote control and select "On" to turn off the audio temporarily. VOLUME +/- button To restore the audio to its previous level, press INPUT...

  • Page 25: Remote Control Operation

    Basic operation Remote control operation Using the remote control for some frequently Remote control used operations is advisable. Just pressing one of the buttons enables you to quickly without calling up the screen menu. INPUT VIDEO HDMI AUTO MENU FREEZE button Press FREEZE button on the remote control, video will be paused and the audio is muted.
  • Page 26 Press SCREEN button on the remote control to select the screen size you want. INPUT (Normal / Wide / Full) VIDEO HDMI *“Full” is not available for EK-110U AUTO MENU D.ZOOM+ button Press D.ZOOM+ button, the on-screen menu will disappear after for a while.

  • Page 27: Input Select

    Basic operation Input select Remote control Direct Operation Press VGA, ViIDEO or HDMI on the remote control as input source. INPUT INPUT VIDEO VIDEO HDMI HDMI Menu operation AUTO MENU 1 Press INPUT button on the top control or remote controll to display the input select menu.
  • Page 28 Basic operation Remote control Select it when the video input S-video signal is connected to S-VIDEO INPUT INPUT IN terminal. VIDEO HDMI AUTO MENU When input source is from Network network connected to LAN terminal with LAN cable, please Top control select "Network".

  • Page 29: How To Operate The Screen Menu

    Basic operation How to operate the screen menu Top control The projector can be adjusted or set via the  button on-screen menu. Each main menu can be divided into several levels of submenus, and MENU subme nus are also divided into several levels button of submenus.

  • Page 30: Menu Bar

    Basic operation Menu bar Main menu Sub menu Display ① Auto PC adj. Fine sync ② H Position V Position ③ H. Size Aspect Normal ④ Project way Front Menu position Center ⑤ Background display Blue System 1024 x 768, 60Hz ⑥...

  • Page 31: Display

    Display Auto PC adj. Auto PC Adjustment function is provided to automatically adjust Fine sync, Horizontal, Vertical and H.Size to conform to your computer. Menu operation Auto PC adj. Menu Auto PC adj. Display 1. Press MENU button on the remote control or top control to display screen menu.

  • Page 32: Aspect

    Wide Projects the image at 16:9 aspect ratio. Full To provide an image to fit the screen. *“Full” is not available for EK-110U Project Way This function is used to set the project way. Project way menu 1 Press MENU button on the remote control to display screen menu.

  • Page 33: Menu Position

    Display Menu Position Menu position This function is used to change the position of screen menu. Display 1 Press MENU button on the remote control Auto PC adj. to display screen menu. Press  button to Fine sync select "Display", then press the OK button. H Position V Position 2 Press...

  • Page 34: System

    Display System Computer system select The projector automatically tunes to various types of computers with its function of Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically detects the signal format and tunes to project proper images without any additional setting. System menu One of the following messages may appear: When the projector cannot recognize...

  • Page 35: Color Adjust

    Color adjust Color adjust menu is used to set the image mode and adjust the image. INPUT 1 Press MENU button on the remote control VIDEO HDMI or top control to display screen menu. Press  button to select "Color adjust", then AUTO MENU press the OK button.

  • Page 36: Color Adjust (Computer)

    Color adjust Color adjust (Computer) 1 Press MENU button on the remote control or Color adjust (Computer) top control to display screen menu. Press  button to select "Color adjust", then Color adjust press the OK button. Image mode Standard 2 Press...

  • Page 37: Color Adjust (Video,S-Video,Component)

    Color adjust Color adjust (Video,S-video,Component) 1 Press MENU button on the remote control or Color adjust (Video,S-video, Component) top control to display screen menu. Press  button to select "Color adjust", then Color adjust press the OK button. Image mode Standard 2 Press...

  • Page 38: Setting

    Operation Status Check O: Active X: Not Active * The projector can start up by “Wake on LAN” tool in Normal Standby mode. The software and its manual can be downloaded from EIKI global website (for EK-110U only) URL: https://global.eiki.com...

  • Page 39: High Land

    Setting High land High land Enable to control the fan through the Setting menu. Setting You can select the running speed of the fan On start according to the altitude of the location where Standby mode the projector is installed. High land Lamp control Cooling fast...

  • Page 40: Closed Caption

    Setting Closed Caption Allows the subtitle to be displayed for the Closed Caption audio contents or other information. If the input Setting source contains closed caption, you can enable On start this function and change the channel. Press Standby mode ...

  • Page 41: Iris

    Setting Iris Iris This function is used to increase the contrast of Setting the image. On start On ..Enable Iris function, increase the Standby mode contrast of the image. High land Lamp control Off ..Disable Iris function. Cooling fast Normal Closed caption Key lock...

  • Page 42: Hdmi Setup

    Setting HDMI setup When the external equipment is connected to "HDMI" terminal, if the image is not projected properly, please switch the settings of "Image" or "Sound" in "HDMI setup" menu. 1 Press the MENU button to display the screen Setting menu.

  • Page 43: Expand

    Expand The projector has Expand menu that allows you to set the other various expand functions described as follows. 1 Press MENU button on the remote control to display screen menu. Press  button to select "Expand", then press the OK button. 2 Press ...

  • Page 44: Keystone

    Expand Keystone Keystone menu This function is used to store or reset the keystone correction when the AC power cord is Expend unplugged. Keystone 1 Press MENU button on the remote control Keystone Store to display screen menu. Press  button H/V Keystone Corner correction to select "Expand", then press the OK button.
  • Page 45 Expand Curved correction (This function is not available for EK-110U) Adjust when the linearity is not uniform or the vertical and horizontal lines are distorted. Press▲▼◄►to adjust the item. Items Operation Adjustment Adjustment range Adjust the right of Press the►button...

  • Page 46: Logo

    Default ..Show the factory-set logo. Language User..Show the image captured by user. Auto setup Off ... Show the countdown display only. Keystone *“User” is not available for EK-110U Logo Security Capture Power management You can capture a projected image as start logo .

  • Page 47: Security

    Pin code dialog box appears, Press ◄► button to enter the correct code. The New PIN code input dialog box appears. Set a new PIN code.  Note: ● Keysotne-Curved correction and Logo - Capture and User function does not support EK-110U. CAUTION: WHEN YOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PIN CODE NO.

  • Page 48: Power Management

    Expand Power management Power management For reducing power consumption as well as Expend maintaining the lamp life, the Power management Language function turns off the projection lamp when the Auto setup projector is not operated for a certain period. Select Keystone one of the following options: Logo...

  • Page 49: Test Pattern

    Expand Filter check Check the temperature iside the projector and make reactions. On: enable the filter check function *when the projector checked any filter issue the warning message would pop-up automatically Off: disable the filter check function Note: ● When the lamp counter is less than 50 hours, and the projector has checked filter warning condition, there won't pop-up the warning message but the filter check function would change the seeting from On to Off automatically.

  • Page 50: Factory Default

    Expand (1) Press MENU button on the remote control to display screen menu. Press  button to Network setting select Expand, then press the OK button. DHCP IP address (2) Press  button to select Network, and Subnet then press the OK button to enter the network Gateway menu.

  • Page 51: Memory Viewer

    Memory viewer The Memory Viewer function makes it possible to project the pictures which are stored in the USB memory when the USB memory is inserted into the projector 1 Press INPUT button on the remote control to select MEMORY VIEWER from the Input menu. 2 Press MENU button on the remote control to display screen menu.

  • Page 52: Information

    Information The information menu is used to the detect signal of projected image and running state. Menu operation Press MENU button on the remote control or info. menu top control to display the screen menu. Press  to select Info., the information menu will Info.

  • Page 53: Network Control Instructions

    Network Control Instructions LAN control Function : PC controls projector via LAN. Preparation: 1. Equipments: PC, projector, cables 2. Connection procedures: Connect the projector to routers or switches of the LAN by direct or cross cable. If it fails to connect PC and projector by parallel cable, please switch to cross cable as suggested.
  • Page 54 Network Control Instructions 4. Activate the Web browser in the personal computer. 5. Enter the IP address set by the projector into the URL input field of the Web browser. 6. Select "Login" to login the Network Display System page. (Both the initial name and passwords are "admin".) ...
  • Page 55 Network Control Instructions "System Status" page Display the status of the projector for the following items. ① ② ③ ① Model Name ③ LAN Status Displays the model No. of the projector. Displays the connection status of the LAN. ② Versions Displays the version of the firmware of the projector.
  • Page 56 Network Control Instructions "Picture Setup" page ① ② ③ ④ ⑤ ⑥ ① Brightness ④ Color Adjusts the brightness of the projected image. Adjusts the color saturation of the projected image. ② Contrast Adjusts the contrast of the projected image. ⑤...
  • Page 57 Network Control Instructions "Image Setup" page ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ① Aspect ⑦ Auto PC adj. Switches the aspect of the projected image. Executes the Auto PC adj. function. ② Fine sync ⑧ V Keystone Adjusts the fine sync of the projected image.
  • Page 58 Network Control Instructions "Network Setup" page ① ② ① LAN Setup Gateway Select [Obtain an IP address automatically] Enter the default gateway address when if you want to enable the DHCP client. not using a DHCP server. IP Address Enter the IP address when not using a DHCP Enter the DNS server when not using a server.
  • Page 59 Network Control Instructions Search for projector display ① Click to enter Search, select the projector and connect it. Please setting the same IP address of the projector in pwPresenter software, (such as: 192.168.1.100). Both the initial name and passwords are "admin". Note: "Network".
  • Page 60 Network Control Instructions Global Setting: setting remote control, capture ⑤ Network Display Management by audio or screen etc. Setting device and password management. Multicast Setting: setting Sound volume, Bandwidth and Capture rate etc. ⑥ Disconnect the projector.

  • Page 61: Using Useful Functions

    Using useful functions Memory Viewer function The Memory Viewer function is used to project the pictures which are stored in the USB memory when the USB memory is inserted into USB A(VIEWER) terminal of the projector. Memory Viewer function supports the following image files. Extension name Format Description...
  • Page 62 Using useful functions Play the PDF Playing the PDF file. press ▲▼◄► to select a PDF file and press the OK button, playing the PDF on the full screen. Displays the previous or next page. The page number increases or decreases by 5 pages. The page number increases or decreases by 1 page.

  • Page 63: Usb Display Function

    Using useful functions USB Display function The USB Display function is used to project the image from the computer which is connected to USB- B(DISPLAY) terminal of the projector by a USB converting cable. ■ When using Windows Windows operation environment Windows Vista 32 bit, Windows 7 32/64 bit, Windows 8 32/64 bit Intel Core 2 Duo 2.0 GHz or faster, the compatible processor Amount of memory...
  • Page 64 Using useful functions ■ When using Mac OS Mac OS operating environment Mac OS X 10.5, 10.6, 10.7 Power PC G4 1GHz or faster Amount of memory 512 MB or more Hard-disk free space 20 MB or more Display Resolution 640 x 480 or more, 1 600 x 1 200 or less ●...

  • Page 65: Maintenance And Cleaning

    Maintenance and cleaning WARNING indicator The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator to take proper maintenance. The projector is shut down and the WARNING indicator is flashing red. WARNING indicator When the temperature inside the projector exceeds the normal temperature, the projector...

  • Page 66: Cleaning The Filter

    Maintenance and cleaning Cleaning the filter The air filter prevents dust from accumulating on the surface of the optical elements inside the projector. Should the air filter become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in a buildup of internal heat and adversely affects the life of the projector.

  • Page 67: Clean The Projector Lens

    Maintenance and cleaning Clean the projector lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.

  • Page 68: Replace The Lamp

    Maintenance and cleaning Replace the lamp When the projection lamp of the projector Lamp replacement icon reaches its end of life, the Lamp replacement icon appears on the screen. Replace the lamp Lamp replacement with a new one of the same type promptly. The timing when the lamp replacement icon appears is depending on the lamp mode.

  • Page 69: Order Replacement Lamp

    Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. Replacement Lamp Model No.: 22040002 (for EK-100W, EK-101X, EK-102X) 22040003 (for EK-110U) LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly.

  • Page 70: Appendix

    Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. - Make sure you have properly connected the projector to peripheral equipment. - Make sure all equipment is connected to the AC outlet and the power is turned on. - If the projector does not project an image when it is connected to a PC, restart the PC.
  • Page 71 Appendix No Sound - Check the audio cable connection from audio input source. - Adjust the audio source. - Press the VOLUME + button. - Press the Mute button. - When the AUDIO OUT is plugged in, the projector’s built-in speaker is not available.

  • Page 72: Menu Tree

    V Position -5 to +5 In different signal, H.Size -15 to +15 H.Size range will different Normal "Full" is not available Aspect Wide for EK-110U Full Front Rear Ceiling/Front Project way Ceiling/Rear Auto ceiling/Front Auto ceiling/Rear Upper left Upper right...
  • Page 73 Appendix Main menu Sub menu Setting Note Contrast 0-63 Brightness 0-63 Color temp. High/Mid/Low 0-63 Computer input Green 0-63 Blue 0-63 Sharpness 0-15 Color adjust Contrast 0-63 Brightness 0-63 Color 0-63 Component Input Tint 0-63 S-video Input 0-63 Video Input Green 0-63 Blue...
  • Page 74 H/V Keystone Keystone Corner correction Curved correction Reset value Logo select Default/User/Off "User, Capture" is not available Capture for EK-110U Logo Logo PIN code lock On/Off Logo PIN code change PIN code lock On/Off Security PIN code change Ready Expand...
  • Page 75 Appendix Main menu Sub menu Setting Note Set Slide Slide down Slide transition effect Slide right Extend order Size order Sort Order Timer order Name order Memory Viewer No Rotate 270 Degrees Rotate 180 Degrees 90 Degrees Best Fit On/Off Repeat On/Off Apply...

  • Page 76: Indicator And Projector State

    Appendix Indicator and projector state Check the indicator to know about the state of projector. Indicator State of projector POWER WARNING (Green/Red/ (Red) Yellow) Your projector is in Off status (without AC power supply). Your projector is in standby status. Press Standby button to turn it on. Your projector is in normal status.

  • Page 77: Compatible Computer Specifications

    Appendix Compatible computer specifications Your projector is designed to accept every analog computer signal below Dot Clock 160MHz and digital computer signal below Dot Clock 150MHz. See table below for details on resolution and relevant frequency.: Signal Frequency Signal Frequency Input Resolution Input...

  • Page 78: Technical Specifications

    WUXGA: 0.9m-9.6m(W) 1.1m-11.6m(T) F=1.6-1.76, f=19.158-23.018mm; Manual zooming and focusing; Lens Zoom Ratio: 1.2x optics Lamp Consumption(W) 218W / 225W (for EK-110U only) Terminal VGA IN 1/YPbPr/S-VIDEO IN Mini D-sub 15 pin x1 VGA IN 2/VGA OUT Mini D-sub 15 pin x1...

  • Page 79: Configurations Of Terminals

    Appendix Configurations of terminals terminal pin assignments and signal names COMPUTER IN 1 R/Pr/S-C G/Y/S-Y B/Pb/- ----- DDC data HD/SYNC DDC clock Note: The Pin 1, 2 and 3 (Pr, Y, Pb): for YCbCr/YPbPr signal. The Pin 1 and 2 (S-C, S-Y): for S-Video signal. terminal pin assignments and signal names COMPUTER IN 2/COMPUTER OUT -----...

  • Page 80: Content Of Hazardous Substances And Elements

    Appendix Content of hazardous substances and elements Hazardous substances and elements Name of parts Cr6+ PBDE Optical parts ○ ○ ○ ○ ○  Electric parts ○ ○ ○ ○ ○  Cabinet, mechanical parts ○ ○ ○ ○ ○ ...

  • Page 81: Pin Code Memorandum

    Appendix PIN code memorandum Write down the PIN code in the blank below and keep it, If you forgot or lost the number and unable to operate the projector, contact the service center. Factory default PIN code 111* PIN code lock Factory default PIN code 111* Logo PIN code Lock No.
  • Page 84 +420 241-403-095 Fax: +420 241-409-435 E-Mail: info@eiki.cz China South East Asia EIKI (Shanghai) Co., Ltd. EIKI Industrial (M) Sdn Bhd LAKESIDE OASIS MIDDLE RING No. 11, Nouvelle Industrial Park, BUSINESS CENTRE Lorong Teknologi B, Taman Sains Block 1,Room 606, Selangor 1, Kota Damansara PJU5,...

This manual is also suitable for:

Ek-100 seriesEk-100wEk-101xEk-102xEk-103xLc-xb200

Table of Contents