Regular Maintenance; Status Light Indicator - Eiki EK-501W Owner's Manual

Status light indicator

The status light indicator shows status of projector protection function. Check status and POWER
light indicator for good maintenance operation.
Note:
Unplug the AC power cord in case of any abnormality as it may lead to fire or electric
shock.
The projector turns off and the status light indicator
Your projector powers off automatically to protect components within it when it is overheated. The
POWER indicator flashes when your projector is cooling down. Press the STANDBY button to
power your projector on again when it is cooled down to normal operation temperature.
FILTER STATUS POWER
The status indicator
flashing red
Check the following:
– Is adequate clearance provided for your projector's ventilation? Check the installation status
and any air outlet block.
– Is your projector installed at location close to outlet of air conditioning equipment? Keep your
projector away from air outlet of air conditioning equipment.
– Is the filter in clean condition? Please clean the filter regularly.
Your projector powers off and the status light indicator turns red.
The STATUS indicator turns red and your projector powers off to protect its internal components
whenever an abnormality is detected. Unplug the AC power cord and connect again. Restart your
projector and run checkup routine. If the problem persists, unplug the AC power cord and call your
service center for checkup and maintenance.
FILTER STATUS POWER
The status indicator
turns red
58

Regular maintenance

flashes
red.
Note:
The POWER indicator stops flashing when your
projector's internal temperature cooled down to
normal and it is powered on again.