Terminal - Eiki EK-361WST Owner's Manual

Name and function of your projector

Terminal

2
1
LAN
Connect network cable to this port for con-
trolling and operating your projector via
network.
USB-B IN
The terminal is to use the USB display function,
when connected the projector to computer with
USB cable
USB-A IN
USB-B
When using the Memory Viewer function, insert
HDMI �
LAN
the USB memory directly to this terminal.
USB-A
�V/�.�A
HDMI 1 IN
Connect HDMI digital output signals to this
terminal.
3
USB-B
HDMI �
LAN
USB-A
�V/�.�A
VGA IN
HDMI �
11
12
4 5
6
VGA IN
HDMI �
HDMI 2 IN
Connect HDMI digital output signals to this
terminal.
VGA IN
Connect output signal from computer to this
terminal.
VGA OUT
AUDIO OUT
Transmit signals from
AUDIO OUT
VGA OUT
Output audio signals to amplifier or other audio
AUDIO IN
equipment.
RS-���C
AUDIO IN
"Line out" to "AUDIO OUT" terminal from input
audio signals. (Speakers are not equipped.)
RS232C
Connect serial cable to this terminal when using
RS232 device to control or operate your projector.
CENTER
Kensington Security Slot
This slot is for a Kensington lock used to
deter theft of the projector.
* Kensington is a registered trademark of
ACCO Brands Corporation
Power cord connector
8
7
AUDIO OUT
VGA OUT
AUDIO IN
RS-���C
CENTER
INPUT
to other displays
ENTER
MENU EXIT
FOCUS CORNER
INPUT
9
10
ENTER
MENU EXIT
FOCUS CORNER
17