Press (DSPL/PTY) during FM reception
until "PTY" appears.
The current programme type name appears if
the station is transmitting PTY data.
"--------" appears if the received station is not
an RDS station, or if RDS data is not
Press M or m repeatedly until the
desired programme type appears.
The programme types appear in the order
shown in the table.
"NO Document" appears if the programme
type is not specified in the RDS data.
The unit starts searching for a station
broadcasting the selected programme type.
Setting the clock
The CT (Clock Time) data from RDS
transmission sets the clock automatically.
During radio reception, press (MENU),
then press M or m repeatedly until
Press , repeatedly until "CT········on"
The clock is set.
Press (ENTER) to return to the normal
To cancel the CT function, select "CT·······off" in
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by
the CT function and the actual time.