Transfer Gear Oil (Fg) - Mitsubishi Fuso Canter 2013 Owner's Manual

12-32
Simple inspection and service
4 Transfer gear oil <FG>
Replacement intervals
Recommended oil:
Gear oil
API classification GL-3 SAE 80 (general)
API classification GL-3 SAE 90 (warm regions)
API classification GL-4 SAE 80 (general)
API classification GL-4 SAE 90 (tropical regions)
Quantity required:
Quantity
4.1 Check
WARNING
Do not check the oil level immediately after
driving, as
extremely hot oil.
Give the oil time to cool before performing
the inspection.
Z12521
1. Remove inspection plug
2. Check that the oil surface
ing of the inspection plug hole
finger straightly into it. If insufficient, add the oil
from the inspection plug hole up to the opening.
Put your finger straightly into the inspection plug
hole after one minute has passed, and check
that the oil is filled up to the opening of the hole.
CAUTION
The added oil should be of the same grade and
Z18456
viscosity as the oil originally placed in the trans-
fer.
3. Replace the gasket of the inspection plug with a
new one.
Every 60,000 km
(36,000 miles) or every
24 months
Approx. 3.6 liters (3.8 qts)
you could be scalded by
.
reaches the open-
by putting your