Brake Fluid - Mitsubishi Fuso Canter 2013 Owner's Manual

12-36
Simple inspection and service
4. After oil has drained out completely, install and
tighten the drain plug.
Tightening
torque
5. Add oil through the inspection plug hole until it
reaches the bottom of the hole.
6. Like with the drain plug, replace the inspection
plug gasket with a new one and install the plug
by tightening it to the specified torque.
Tightening
torque

6 Brake fluid

Inspection At the time of pre-operational
intervals check
Replacement
Every 24 months
intervals
Have the brake fluid replacement performed by an
authorized dealer.
Recommended fluid:
Brake fluid SAE J1703
FMVSS No. 116, DOT3
110 ± 10 N·m (81 ± 7 ft.lbs.,
11 ± 1 kgf·m)
110 ± 10 N·m (81 ± 7 ft.lbs.,
11 ± 1 kgf·m)