B6. Check Gear Oil Level In Manual Transmission; B7. Check Gear Oil Level In Transfer Case (4Wd); B8. Change Gear Oil In Manual Transmission - Mitsubishi PAJERO IV Service Manual

2-26
2. Check to be sure that the seal and boot of the ball
joint are correctly installed (in the correct
position), and that they are not damaged.
3. Check tie-rod end lock nut for looseness. If lock
nut is loose, adjust toe-in and then tighten lock nut
to the specified torque.
Tightening torque: 93 ± 15 N⋅ m
B6. CHECK GEAR OIL LEVEL IN MANUAL
TRANSMISSION
Transmission oil
1. Remove the filler plug.
2. Check that oil level is up to the lower edge of the
filler plug hole.
3. Check that the oil is not noticeably dirty.
4. Tighten the filler plug to the specified torque.
Tightening torque: 32 ± 2 N⋅ m
PERIODIC INSPECTION AND MAINTENANCE
OPERATIONS UNDER THE VEHICLE
AC608838 AB
M6020300600206
Filler plug hole
Filler plug
AC604825AB
B7. CHECK GEAR OIL LEVEL IN
TRANSFER CASE (4WD)
Transfer oil
1. Remove the filler plug.
2. Check that oil level is up to the lower edge of the
filler plug hole.
3. Check that the oil is not noticeably dirty.
4. Tighten the filler plug to the specified torque.
Tightening torque: 32 ± 2 N⋅ m
B8. CHANGE GEAR OIL IN MANUAL
TRANSMISSION
Drain plug
1. Remove the oil filler plug.
2. Remove the drain plug and drain the oil.
3. Tighten the filler plug to the specified torque.
Tightening torque: 32 ± 2 N⋅ m
4. Fill with specified oil till the level comes to the
lower portion of oil filler plug hole.
Specified transmission oil:
Gear oil API classification GL-4 SAE 75W−
85W
Quantity: 3.2 L
5. Tighten the filler plug to the specified torque.
Tightening torque: 32 ± 2 N⋅ m
M6020300700236
Filler plug hole
Filler plug
AC604825AC
M6020300800244
Filler plug
AC604827AB