9. Remove the connectors
thus pulled out.
CAUTION
•
Do not turn the beam adjusting gear
ing the beam adjusting gear would change
the beam setting, thus creating a nuisance
for drivers of other vehicles. If you acciden-
tally turn the beam adjusting gear, have an
authorized dealer perform necessary inspec-
Z21752
tion.
•
When setting down the removed headlamp,
place it on a soft cloth to avoid scratching
the lens.
•
Headlamp installation
1. Install the connectors
Z21753
2. Insert the tabs
holes
Z22089
3. Fit the headlamp's bolts
Z21750
on the headlamp.
on the headlamp
, and fit the headlamp in place.
.
13-23
from the headlamp
. Turn-
into the