Table of Contents
Advertisement
9-12
Heating and air conditioning
2 Using the air conditioner manually
•
Operate each dial as desired.
Even during automatic (AUTO) operation, the
operated function will take priority.
•
Functions other than the operated one will be
controlled automatically.
•
To stop operation, set the air volume adjustment
dial to OFF.
2.1
Defrosting the windshield
•
When you turn the air outlet selector dial to
the air conditioner operates automatically and
the air selector is switched to draw in outside air.
•
To quickly defrost the windshield, set the air vol-
ume adjustment dial to maximum, and then set
the temperature to maximum using the tempera-
ture adjustment dial.
Z21375
2.2
Preventing contaminated air from entering
the vehicle
•
Press the air selector switch so as to select air
recirculation.
•
When the mode switches to air recirculation, the
indicator lamp
•
Each time you press the switch, the mode
switches between outside air ventilation and air
recirculation.
NOTE:
Z21060
•
When the air outlet selector dial and the air vol-
ume adjustment dial are in the "AUTO" position,
and the air selector switch is operated, the air
selector function switches to manual.
•
To put the air selector function in "AUTO", turn
the air outlet selector dial or the air volume
adjustment dial to a position other than "AUTO",
then turn it to "AUTO" once again.
•
Normally, use the outside air ventilation mode.
•
When the humidity is high, if you use the air con-
ditioner in the air recirculation mode for a long
period, condensation is likely to occur on the
windshield.
in the switch lights.
,
Advertisement
Table of Contents
