Table of Contents
Advertisement
•
Use a soft cloth to remove dirt from the disc.
Wipe it in straight lines from the center toward
the outer edge. Never use thinner or antistatic
fluid to clean a CD.
•
Do not use cracked or evidently warped CDs.
Also avoid using CDs with a printable label sur-
face. Using these CDs may cause the player to
malfunction.
•
Do not mark the CD with a ballpoint pen or the
like. Also do not stick paper or a label on its sur-
face.
•
New CDs may have rough inner and/or outer
edges (formed by excess material during pro-
duction). CDs with rough edges may not be
inserted into the player or may cause the repro-
duced sound to skip. If you find any roughness
on the edges of a new CD, remove it using a
ballpoint pen or other appropriate object before
inserting it into the player.
1.2
Discs and files
The audio system on your vehicle can play both
music CDs (CD-R, CD-RW and CD-ROM) and
MP3/WMA file CDs (CD-R and CD-RW).
•
Discs
If the disc is a CD-R or CD-RW, the player cannot
play it if the recording technology used to write data
to the disc and its physical format are inappropriate
for the system.
The following discs cannot be played by this sys-
tem:
•
Warped, damaged or contaminated discs
•
Discs with broken data
•
Discs with data recorded by packet writing
•
Discs not finalized
NOTE:
•
Packet writing is one of the technologies used
for recording data on CD-R/CD-RW.
•
Finalization involves writing data which indicates
that the medium (such as CD-R/CD-RW) will not
accept any more data written to it, in order to
make it compatible with reproduction systems.
For details on finalization, please refer to the
instruction manual of your CD-R/CD-RW writing
software or CD-R/CD-RW recorder.
10-13
Advertisement
Table of Contents
