To Set A Desired Speed - Mitsubishi Fuso Canter 2013 Owner's Manual

5-38
Switches and controls
ON
Z21521
Z21524
SET/RESUME switch
SET:
Turn this switch to set a desired speed and to
reduce the set speed as well. The switch returns
automatically to the neutral position after having
been turned.
RESUME:
Turn this switch to change the set speed to a
higher speed and to return to the previously set
speed as well. The switch returns automatically
to the neutral position after having been turned.
Cruise control indicator lamp
If the cruise control is activated, this lamp illumi-
nates during driving.
Cancel switch
Press this switch to stop cruise control opera-
tion.

2 To set a desired speed

1. If your vehicle is equipped with an exhaust
brake, check that the exhaust brake switch is in
the "OFF" position. If the switch is in the "ON"
position, place it in the "OFF" position.
Press the ON side of the cruise control main
switch. The lamp
nate.
2. Depress the accelerator pedal until the desired
speed is reached.
inside the switch will illumi-