Installing Tire Chains - Mitsubishi Fuso Canter 2013 Owner's Manual

Table of Contents

Advertisement

11-4
In cold weather
Do not apply the parking brake in extremely cold
conditions that could cause it to freeze up and
become impossible to release. In such condi-
tions, take the following steps:
1. Stop the vehicle and pull the parking brake
lever. Never park on a slope.
2. Place the gearshift lever in the "P" position.
3. Block the wheels securely with chocks.
4. Release the parking brake lever.
Operate the air conditioner at least once a
month to maintain its functions even during the
cold season when it is not being used.

Installing tire chains

<Vehicles other than FG models>
On FG models, tire chains cannot be used on
both front and rear wheels.
Make sure that tire chains are installed properly
so that they do not become loose and interfere
with other vehicle parts while the vehicle is in
motion.
Use triple chains corresponding to tire size.
CAUTION
Do not use chains on the front wheels on FE;
instead, use of snow tires is recommended.
When fitting tire chains, refer to the instruc-
tions supplied with them.
Drive at low speeds, desirably at speeds
lower than 30 km/h (19 mph), when chains
are installed on wheels.
Driving on a dry road with chains installed
may damage the chains as well as the road
surface. Avoid doing so as far as possible.
Make sure that the chains and their spring
bands are not excessively worn or otherwise
damaged.
If you hear an abnormal noise while driving,
stop the vehicle in the nearest safe place and
check the tire chains.

Advertisement

Table of Contents
loading

Table of Contents