Odometer/Trip Meter; Display Mode Selection And Settings - Mitsubishi Fuso Canter 2013 Owner's Manual

6-8
Instruments and warning lamps

2 Odometer/trip meter

When the starter switch is turned to "ON", either
"ODO" (odometer) or "TRIP" (trip meter) is dis-
played. The display toggles between "ODO" and
"TRIP" each time the ODO/TRIP switch
pressed.
•
ODO (odometer)
Indicates the total distance covered by the vehicle
to the nearest mile.
•
TRIP (trip meter)
Indicates the distance covered by the vehicle from a
selected point to the present point to the nearest 0.1
mile.
The trip meter has two options: TRIP "A" and TRIP
"B". The indications are independent of each other.
To reset the trip meter to zero, press the ODO/TRIP
switch for at least 1 second. The count of only the
currently displayed option will return to "0.0".
Z21551
NOTE:
If the unit of fuel mileage is changed, the unit for the
odometer and trip meter indication changes accord-
ingly. For information on the fuel mileage display
unit, see page 6-14.
Z22024

3 Display mode selection and settings

3.1 Display mode selection
You can select a desired display mode by pressing
the MODE switch .
is