Table of Contents
Advertisement
13-12
Useful advice for emergencies
1.3
Inspection and replacement of blade-type
fuses
1. Place the starter switch in the "LOCK" position
and turn all other switches OFF.
2. To remove the fuse that is to be replaced, grip it
using the fuse puller
amperage and protected circuit of each fuse are
shown on the inside of the lower cover.
Z21422
3. If a fuse is blown, be sure to select a spare fuse
of the specified amperage for replacement.
Z11217
in the fuse box
. The
Advertisement
Table of Contents
