Combination Switch; Arrangement Of Switches; Lighting Switch - Mitsubishi Fuso Canter 2013 Owner's Manual

5-16
Switches and controls

1 Arrangement of switches

Lighting switch

Passing/dimmer switch
Turn signal switch
Exhaust brake switch <option>
Wiper and washer switch
Z21344
2 Lighting switch
CAUTION
Keeping the headlamps on for a long period
without the engine running can drain the bat-
tery, making the engine impossible to start.
The lighting switch can be used with the starter
switch in any position.
Turning the knob at the end of the lever controls the
Z21345
illumination of lamps as follows:
OFF
position
position
position
*: Illuminated by daytime running light system
NOTE:
Even when the vehicle is operated with the lighting
switch in the "OFF" or
running light system causes the low-beam head-
lamps to be lit. (The headlamps are dimmer than
when activated using the lighting switch.) The
indicator lamp is also lit. When the parking brake is
applied or the engine is stopped, the headlamps
and the

Combination switch

Identification, clearance
and side marker,
parking, tail, license,
front fog <option> and
meter illumination lamps
Off
On
On
position, the daytime
indicator lamp go off.
Headlamps
On*
On*
On