Mitsubishi Fuso Canter 2013 Owner's Manual page 38

3-12
Opening and closing
CAUTION
•
Use the designated standard type of battery.
If the battery is replaced with an incorrect
type, the battery could explode.
•
Attach the battery with the "+" mark facing
upward.
•
Do not use a metal tool such as tweezers to
replace the battery. Doing so could cause a
short circuit.
•
Dispose of used batteries in accordance with
local regulations. Inconsiderate disposal
could adversely affect the environment. For
disposal, wrap the battery with tape, vinyl
sheet, etc. for insulation so that the battery
cannot contact other metal objects or be
exposed to water.
•
Do not expose the inside of the remote con-
trol switch to water, and keep it away from
dirt and dust. Otherwise, the switch could
fail.
Lithium battery CR2032
1. Use a crosshead screwdriver
screw and remove the cover
Z20939
2. Place a new battery with the "+" mark facing
upward.
3. Reattach the cover and the screw.
4. Operate the switch and check that the remote
control works.
Z20940
Designated battery Quantity
1
to turn the
.