Configuration Of Headset Button; Display New Messages And Call Information Upside Down - ASCOM d62 Configuration Manual

Configuration Manual
Ascom d62 DECT Handset
4 In the Headset speaker adjustment drop-down list, select the speaker gain to be
used.
Note: Changing these parameters may result in a very high sound level which can cause
hearing damage. In addition, these parameters may result in lower sound quality such as
noise and echo. If the audio problems occur, it is noticable for the person listening on the
conversation. Evaluate carefully before applying.

5.32.2 Configuration of headset button

Note: This feature is not applicable for d62 Talker.
It is possible to configure a headset's answer button with a predefined function.
Configure a corded headset button
1 Select Connections > Headset.
In Headset type drop-down list, select headset to be used.
2
3 In the Call with headset button drop-down list, select one of the following:
• Not activated - it is only possible to answer/end a call.
• Last called number - the last called number will be dialled.
• Predefined number - a predefined number will be called (if selected, continue with
step 3)
• Hook off - activates the post-dial function, that is, a dial tone is heard and the
user can enter the number to be called.
4 If needed, in the Predefined number field, enter the number to be dialled when the
headset button is pressed.
Configure a Bluetooth headset button
Note: See the User Manual for the Bluetooth headset for more information on how to
connect it and use its answer button. This feature is not applicable for d62 Talker.
1 In the Call with headset button drop-down list, select one of the following:
• Not activated - it is only possible to answer/end a call.
• Last called number - the last called number will be dialled.
• Predefined number - a predefined number will be called (if selected, continue with
step 3)
• Hook off - activates the post-dial function, that is, a dial tone is heard and the
user can enter the number to be called.
2 If needed, in the Predefined number field, enter the number to be dialled when the
headset button is pressed.

5.33 Display New Messages and Call Information Upside Down

New messages and information about incoming calls can be displayed upside down. This can
be useful if you wear the handset in a belt and want to read the message/call information
without rotating the handset. When pressing any key, the messages will be displayed in the
normal way.
1 Select Settings > Display
2 In the Rotate display text drop-down list, select one of the following:
• On - New messages and call information will be rotated 180 degrees.
• Off - Disables the rotation function.
08 December 2012 / Ver. H
TD 92639EN
45