Enable/Disable Call List; Actions When Handset Placed In Charger; In Charger Action When Not In Call - ASCOM d62 Configuration Manual

Configuration Manual
Ascom d62 DECT Handset

5.14.3 Enable/Disable Call List

It is possible to prevent that the handset stores outgoing calls and incoming calls in the Call
list. This can be useful to prevent that an unauthorized person views the call list.
1 Select Customization > Phone restrictions
2 In the Possible to enable call list drop-down list, select one of the following:
• Yes - The handset will store the calls in the Call list
• No - The handset will not store any calls in the Call list
NOTE: Old incoming and outgoing calls (if any) will not be deleted in the Call list when
setting the parameter to No. It is recommended to clear all call lists (if any) to ensure
that no old calls are stored.

5.15 Actions when Handset Placed in Charger

5.15.1 In Charger Action when not in Call

The handset can be configured to perform an action when it is placed in a charger. The
selected action is only performed when no call is established. When the handset is removed
from the charger, it returns to previous settings. NOTE: If the Logout action is enabled, the
handset needs to be logged in manually when it is removed from the charger.
1 Select Connections > In Charger
2 In the In charger action drop-down list, select one of the following:
• No action - no action will be performed when handset is placed in charger
• Switch off - the handset will be switched off when placed in charger
Redirect - the handset will redirects all calls and messages (d62 Messenger and
d62 Protector only) when placed in charger.

NOTE: The destination number must be programmed in the PBX to be able to
redirect calls/messages.
• Sound off

NOTE: Messages with breakthrough (for examples messages with high/alarm
priority) will not be muted. If you want to mute all messages (regardless of
priority) also set the Show and indicate incoming messages parameter.
• Logout - the handset will be logged out when placed in charger. This option is only
visible if the license dependent Shared Phone feature is enabled.
• Message absence - if a message is sent from a system, it will be notified that the
handset is absence.
• Change profile - the handset will change profile when placed in charger.
In the Change to profile drop-down list, select the profile to be used. By default,
only the profile Normal is selectable. If configured, additional profiles will be
visible, see
1.If the parameter "Possible to turn off sound" is set to "No", the handset will not be muted when placed in charger..
08 December 2012 / Ver. H
1
- the handset will be silenced when placed in charger
5.36.1 User Profiles on page 46.
TD 92639EN
27