Example Of Ttr/Ttp Settings - ASCOM d62 Configuration Manual

Configuration Manual
Ascom d62 DECT Handset
2 In the Message alert drop-down list, select "Enhanced beeps according to beep code".
Custom sounds according to beep code
Beep code sent from a system/application
Beep code 0
Beep codes 1- 7
The handset can play customized message alerts that are mapped to beep codes. The
message alerts must first be customized and then mapped to the beep codes.
Tip: It is recommended to use this feature if you want to create a message alert that sounds
like the equipment (for example a respirator) that generates an alarm.
Create Customized Sound
1 Select Settings > Custom Sounds > Custom Sound X (where X represent 1 - 10).
2 Set the following parameters:
• Label - The name of the custom sound (required). The name will be visible when
mapping the custom sound to a beep code later on.
• Melody - The text string represents a non-polyphonic sound. By default, example
of melodies are set for Custom Sound 1 - 7. See also
Custom Sound
• Beat - The tempo in beats per minute to be used when playing the sound.
• Style - The ratio of note to rest period to be used when playing the sound.
• Instrument - The instrument to be used when playing the sound.
Map Beep Codes to Customized Sounds
1 Select Sound and Alerts > Custom Message Alert
2 In the Beep code drop-down lists, select the customized sounds to be used for
respectively beep codes.
Enable Customized Sound
1 Select Settings > Sound and Alert.
2 In the Message alert drop-down list, select "Custom sounds according to beep code".

5.26.2 Example of TTR/TTP settings

Example 1
This example describes the message handling with the following message settings:
• TTP= Prioritize forever
• TTR= Close manually
Tip: It is recommended to use these settings if messages with the highest priority always
shall be displayed until the user closes the current message.
08 December 2012 / Ver. H
on page 60.
The handset plays:
No message alert is played
Corresponding customized sound
Appendix A: Programming
TD 92639EN
38