Audio Adjustment; Echo Canceling; Headset Configuration; Selection Of Headset Type (Corded Headset) - ASCOM d62 Configuration Manual

Configuration Manual
Ascom d62 DECT Handset

5.31 Audio Adjustment

It is possible to configure microphone gain and side tone to achieve optimal audio quality for
each working environment.
The following parameters can be found at:
Audio > Normal >
• Normal side tone adjustment - Determines how much of the speakers voice that is fed
back to the speaker.
• Normal mic adjustment - Determines the microphone sensitivity, that is, how much
sound the microphone shall gain.
The parameter settings affect the "normal" mode, that is, not wired headset, not Bluetooth
headset and not the handsfree/loudspeaking mode.
For configuration of headset audio see,
Note: Changing these parameters may result in lower sound quality and high sound level.
Evaluate carefully before applying.

5.31.1 Echo Canceling

Echo canceling reduces echoes from the surrounding environment. Echo canceling is turned
off by default. The function can be turned on by setting Settings > Answering >
Loudspeaking Mode to "With echo canceling".

5.32 Headset Configuration

A headset is recommended if you frequently use the handset and/or want to have both
hands free. The headset comes in two versions, that is, microphone on boom and
microphone on cable.

5.32.1 Selection of Headset Type (Corded Headset)

In order to achieve optimal audio quality with the different headset types, it is
recommended to set the corresponding headset type. The default setting is "microphone on
a boom", which means that the audio is optimized for using a headset with microphone on a
boom. The headset type can be changed as follows:
1 Select Connections > Headset.
2 In the Headset type drop-down list, select the corresponding headset type to be
used.
If "User headset profile" is selected, continue with chapter
User headset profile
If the preconfigured headset profiles does not match the headset or the audio performance
is bad, it is possible to configure a headset profile.
1 Select Connections > Headset > User headset profile.
2 In the Name of user headset profile field, enter an appropriate name. The name will
be visible and selectable in the handset menu.
3 In the Headset mic adjustment drop-down list, select the microphone gain to be used.
08 December 2012 / Ver. H
5.32 Headset Configuration.
TD 92639EN
User headset profile.
44