Push Button Alarm - ASCOM d62 Configuration Manual

Hide thumbs Also See for d62:
Table of Contents

Advertisement

Configuration Manual
Ascom d62 DECT Handset
• Password protect ALS
Determines if a password is required to turn off the ALS
• Number for automatic call after alarm
Determines which number the handset automatically shall call after an alarm is sent. This
number call also be dialed without sending an alarm, see
without Sending Alarm
See also

5.25 Push Button Alarm

Note: This feature is applicable for d62 Protector only.
It is possible to configure how alarms shall be handled in a system. An alarm can be
activated by a user in two different ways:
• A single long press
• Multiple press
The following alarm types are handled:
• Push-button alarm
• Test alarm
In a template or Number in PDM/Device Manager, the parameters for activation are found
at:
Alarm > Alarm on long press
Alarm > Alarm on multiple press
Parameters in the current version are:
• Alarm type for long press
Test alarm, Push-button Alarm 1, or Push-button Alarm 2, or Not used. If Not used is
selected, it is still possible to dial the call after alarm number without sending an alarm,
see
5.25.1 Call Predefined Number without Sending Alarm
• Text indication for alarm on long press?
• Duration for long press
• Alarm type for multiple press
Test alarm, Push-button Alarm 1, or Push-button Alarm 2, or Not used. If Not used is
selected, it is still possible to dial the call after alarm number without sending an alarm,
see
5.25.1 Call Predefined Number without Sending Alarm
• Text indication for alarm on multiple press
• Define multiple press
1,2
• ALS
• Silent alarm
If enabled, the indication of an alarm has been sent and received is disabled.
1. If the parameters "ALS" and "Silent alarm" are set, no ALS will be triggered after an alarm has been sent.
2. The ALS will not be activated if an automatic call is established after an alarm has been sent.
08 December 2012 / Ver. H
on page 34.
5.25 Push Button Alarm
1
5.25.1 Call Predefined Number
for additional parameter settings.
TD 92639EN
on page 34.
on page 34.
33

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the d62 and is the answer not in the manual?

Questions and answers

Table of Contents