Configuration Manual
Ascom d62 DECT Handset
5.13 Customize the Menu
It is possible to customize the handset's menu by turning certain menues On or Off. This is
done in the PDM/Device Manager by editing a template (or a Number setting) for the
handset (or Number).
The path to these settings in the template depends on the version of the parameter
definition file (.def). In the current version the path is:
Customization > Visibility > X
where "X" can be Messaging, Favourites, etc.
The parameters are found under "X".
The settings for the parameters may have three alternatives, such as:
• Show
• Hide all
• Read only (All settings can be viewed but not modified by the handset user)
5.13.1 Hide Missed Call Window
A missed call is by default indicated by a Missed call window. It is possible to hide this
window and is recommended if a user has, for example, both a DECT handset and a mobile.
Example:
If configured in the PBX, an incoming call to the DECT handset can either be answered using
the DECT handset or mobile. If the user answer the call using the mobile, the Missed call
window will not be displayed in the DECT handset.
Using the PDM and the "Edit template" feature, the parameters can be found at
Settings > Answering.
In the Show missed calls popup drop-down list, select "No" to hide the Missed call window.
5.14 Configure Handset Restrictions
5.14.1 Enable/Disable Mute Function
It is possible to prevent that the handset is muted by a user.
1
Select Customization > Phone restrictions
2
In the Possible to turn off sound drop-down list, select one of the following:
• No - The user will no be able to mute the handset or set the ring volume to silent.
• Yes - The mute restriction is disabled.
5.14.2 Enable/Disable Switch Off Function
It is possible to prevent that the handset is switched off by a user.
1
Select Customization > Phone restrictions
2
In the Prevent switch off handset drop-down list, select one of the following:
• Yes - The user will not be able to switch off the handset by pressing the On-hook
key.
• No - The switch off restriction is disabled.
08 December 2012 / Ver. H
TD 92639EN
26
Need help?
Do you have a question about the d62 and is the answer not in the manual?
Questions and answers