ASCOM d62 Configuration Manual page 22

Configuration Manual
Ascom d62 DECT Handset
When the frequency band is set to "Multifrequency", the handset will adopt to the
applicable frequency band (EU, US or Brazil) used in the specific region after it has been
restarted.
NOTE: The handset will adopt to the frequency band configured in the DECT system.
The recommended procedure when changing frequency band is as follows:
1 The site administrator sends out broadcast message to all handsets informing that
handsets need to be restarted at a specific time.
2 The site administrator enters IP-DECT master and change setting for the frequency
and carriers just before the specific time.
3 All handset users restart their handsets.
After the restart the handsets have changed to the applicable frequency band (EU, US or
Brazil).
08 December 2012 / Ver. H
TD 92639EN
17