Main Brush Cleaning - ECOVACS ECO D62 Instruction Manual

Sponge filter and dust box cleaning
Open the lock at the
bottom of dust box
Sponge Filter Replacement
1) Open the cover of the Deebot, take out the dust box.
2) Push aside the lock catch of the dust box, then open the dust box and clean it.
3) Extract the axle of the dust box's cover.
4) Connect dust box with filters by the axle, then put it back into.

Main brush cleaning

Tips: please look at the main brush once a week and check for hair, threads, etc. being
wrapped around the agitator brush. If it is wrapped, please clean the agitator brush with the
supplied tool.
ENG - 134
Pour out the dust on
sponge filter
If you notice that there
are too much dust on
inside along dust box,
you can put the box
under running water
to get rid of the dust.
(make it dry under sun-
shine for 24 hours) Put
it back into the host af-
ter the box and sponge
filter is completely dry.