Page 2
Instruction Manual, please contact our Customer Service Center where a technician can address your specific problem or question. For more information, please visit the ECOVACS ROBOTICS official website: www.ecovacs.com The Company reserves the right to make technological and/or design changes to this product for continuous improvement.
1. Important Safety Instructions When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. SAVE THESE INSTRUCTIONS 1. This Appliance is not intended to be used by children under 8 or anyone lacking knowledge on proper use.
Page 5
28. When not using the Charging Dock for a long period of time, please unplug it. 29. The Appliance must be used in accordance with the directions in this Instruction Manual. ECOVACS ROBOTICS cannot be held liable or responsible for any damages or injuries caused by improper use.
2. Package Contents and Technical Specifications 2.1 Package Contents Instruction Manual Robot Charging Dock Remote Control with Instruction Manual Button Cell Battery (4) Side Brushes (2) Washable/ Cleaning Cloth Plate Reusable Microfiber Cleaning Cloths 2.2 Specifications Model DA60 Working voltage 10.8V DC Rated power Charging Dock Model...
3. Operating and Programming 3.1 Notes before Cleaning Before operating DEEBOT SLIM, take a few moments to survey the area to be cleaned and remove any obstacles. Remove power cords and small objects from The product is not suitable for use on carpet.
Plug the Charging Dock in. Install Side Brushes Attach Side Brushes to the bottom of DEEBOT SLIM by pressing a brush into each slot with the matching color until it clicks. Power ON Turn the robot’s Bottom Power Switch to the ON position.
Page 11
DEEBOT SLIM is fully charged. Remove DEEBOT SLIM’s battery if the robot will not be used for a long time. In case of battery leakage, please remove the battery and wipe the battery slot clean while wearing protective gloves.
3. Operating and Programming Start Press the AUTO Mode Button on DEEBOT SLIM or on the Remote Control. DEEBOT SLIM starts to work immediately in AUTO Cleaning Mode. To choose another Cleaning Mode, please refer to section 3.3 Cleaning Mode Selection for details.
3. Operating and Programming 3.3 Cleaning Mode Selection DEEBOT SLIM has several cleaning modes to choose from to effectively clean different floors. Cleaning modes are selected using the Remote Control. AUTO Cleaning Mode Edge Cleaning Mode (up to 20 minutes) This is the most commonly used mode.
If nobody is at home. Set Intelligent Scheduling Press the Auto Mode Button on DEEBOT SLIM twice or press the Intelligent Scheduling Button on the Remote Control to set the current time as the scheduled cleaning time. Intelligent Scheduling is set when the robot emits an ascending tune, Auto Mode Button blinks 3 times, then glows a continuous BLUE.
3. Operating and Programming 3.5 Status Indicator Light and Sounds If DEEBOT SLIM detects a problem and needs your assistance, it emits alarm beeps and the AUTO Mode Button flashes red. Alarm Sound Problems Solution Check Driving Wheels for tangled hair or...
4. Maintenance *Before performing cleaning and maintenance, power OFF DEEBOT SLIM and unplug the Charging Dock. 4.1 Dust Bin and Filters Open DEEBOT SLIM’s Top Cover and Remove the filters. Pat the High Efficiency remove the Dust Bin. Open the Dust Bin clean.
4. Maintenance Wash and dry the Cleaning Cloth. Wipe the Cleaning Cloth Plate with a dry cloth. 4.3 Suction Intake and Side Brushes Wipe the Suction Intake with a dry cloth. Remove the Side Brushes. Wipe the Side Brushes and their slots with a clean dry cloth.
4. Maintenance 4.4 Other Components Clean the Universal Wheel by removing any Wipe the Anti-Drop Sensors with a dry cloth hair tangled around it. to maintain their effectiveness. Wipe the Charging Contacts and Charging Dock Pins with a dry cloth.
5. Troubleshooting Please use this chart to troubleshoot common problems using DEEBOT SLIM. Malfunction Possible Causes Solutions DEEBOT SLIM is not powered Move DEEBOT SLIM’s Bottom Power Switch to the ON position. Be sure that DEEBOT SLIM’s Charging DEEBOT SLIM has not made...
Page 20
Scheduling for details. DEEBOT SLIM is powered OFF. Power ON DEEBOT SLIM. DEEBOT SLIM will Keep DEEBOT SLIM powered ON and not clean DEEBOT SLIM’s battery is low. on the Charging Dock to make sure it automatically has full battery to work at any time.
Need help?
Do you have a question about the Deebot Slim and is the answer not in the manual?
Questions and answers