Safety Instruction; Power Supply For The Product - ECOVACS ECO D62 Instruction Manual

1. SAFETY INSTRUCTION

Note
Please conform to the basic safety precautions as follows:
• Read the content in this user guide carefully and install the robot according to the detailed
instructions.
• Safekeeping this guide. If you transfer this machine to another person, please make sure
attach this booklet.
• Any inconsistent operation with this guide would probably cause serious damage to both
human being and the machine itself.
• Do not open the equipment. The components inside the robot host are beyond repair by
user himself, such as remote control and virtual wall.
• This product is only for domestic use, not suitable for industry or outdoor surroundings.
• Please do not press LCD.
____________________________________________________________________________
The Magnetic Tape or Virtual Wall may NEVER be used to confine an elevated area where the
Robot could fall down and hurt a person or cause considerable damage to the room below when
the tape has lost its magnetism power.

Power Supply for the Product

ENG - 116
• The power supply is from a Ni-MH chargeable battery inside
the host of the robot and it is specially assigned with a charging
block to do recyclable charge.
• Please double check the marked supply voltage on the char-
ging block and make sure it is applied according to the instruc-
tions.
• Do not use the damaged power cord or plug, while contact our
after-sales service or find our authorized supplier to maintain.
• As the charging block is heavy, please never drag the block via
pulling it's power cord.
• Remember never to twist and swing or screw the power cord
excessively, neither to block it when close the door.
• We should not put heavy things on it as well.
• Do not let power cord touch hot or sharp surfaces.
• Do not draw out the plug by pulling the cord.
• Keep wet hands away from the plug or machine.
• Pull the plug out of socket when you no longer use the charging
block for some time.
• Use dry cloth to wipe the dust on the plug frequently.