ECOVACS DEEBOT OZMO 937 - Robot Vacuum Manual

Package Contents and Technical Specifications

Package Contents

Note: Figures and illustrations are for reference only and may differ from actual product appearance. Product design and specifications are subject to changes without notice.

Specifications

* Technical and design specifications may be changed in the course of continuous product improvement.

Product Diagram

Robot

1. Top Cover
2. Control Panel
3. Anti-Collision Sensors and Bumper
4. LDS (Laser Distance Sensor)
5. LDS Bumper
6. Anti-Drop Sensors
7. Charging Contacts
8. Main Brush Option
9. Driving Wheels
10. Reservoir Slots
11. Roller Wheel
12. Universal Wheel
13. Side Brushes
14. Battery Pack
15. Reservoir
16. Carpet Detection Sensor
17. Water Outlets
18. Power Switch
19. Upgrade Port
20. Multi-Function Cleaning Tool
21. RESET Button

Control Panel

1. Status Indicator Light
2. Wi-Fi Indicator Light
3. AUTO Mode Button

Docking Station

1. Infrared Signal Generators
2. Docking Station Pins

Dust Bin

1. High Efficiency Filter
2. Sponge Filter
3. Dust Bin Lock
4. Dust Bin Cover
5. Dust Bin Handle

Advanced OZMO Mopping System

1. Water Inlet Cover
2. Water Inlet
3. Reservoir Release Button
4. Cleaning Cloth Plate
5. Washable/Reusable Microfiber Cleaning Cloth
6. Magnet

Operating and Programming

Notes Before Cleaning

Do not use DEEBOT on wet surfaces or surfaces with standing water.
DEEBOT uses SMART NAVI technology (a proprietary laser scanning and mapping system) to scan and generate a map of the home environment. Before operating DEEBOT, take a few moments to survey the area to be cleaned and remove any obstacles.

Please supervise DEEBOT during its first cleaning and assist should there be a problem.

Before using the product on an area rug with tasseled edges, please fold area rug edges under themselves.

Remove power cords and small objects from the floor that could entangle the product, and tidy up the cleaning area to put furniture like chairs in their proper place.

If there is a step or stairs in the cleaning area, please operate DEEBOT to ensure its Anti-Drop Sensors can detect the drop off. It may be necessary to place a physical barrier at the edge of the drop off to keep the unit from falling over the edge.

Please be aware that DEEBOT needs at least an 11cm (4.3") clearance to clean under furniture without complications.

If there is a step or stairs in the cleaning Please do not stand in narrow spaces, such as hallways, or DEEBOT may fail to identify the area to be cleaned.

Please cover reflective surfaces 13cm (5.1") from the ground.

Please be aware that DEEBOT may climb on objects of less than 1.5cm(0.6'') height. Please remove these objects if possible.

Quick Start

• Remove the protection strip from the robot's Bumper before use.
  

1. Docking Station Placement
   • Place the Docking Station on a level floor surface against the wall with the base perpendicular to the ground. Keep the immediate area 1.5m (5') in front of the charger and 0.5m (1.6') on both sides of the charger clear of objects and reflective surfaces.
     
   • Plug the Docking Station in.
     
     * Do not change the location of the Docking Station once DEEBOT has scanned the environment. If it is necessary to relocate Docking Station, power OFF DEEBOT and then power back ON so DEEBOT can re-scan the environment. Alternatively, use the ECOVACS App to direct the robot to rescan the environment.
2. Install Side Brushes
   • Attach Side Brushes to the bottom of DEEBOT by pressing a brush into each slot with the matching color until it clicks.
     
3. Power ON
   • Open the Top Cover. Move the Power Switch to the ON position. "I"=power ON; "O"=power OFF. The Control Panel illuminates, and DEEBOT plays a musical tune. DEEBOT is powered ON when the Control Panel stays illuminated.
     * When DEEBOT is not cleaning, it is suggested to keep it powered ON and charging instead of powered OFF.
     
4. Charge DEEBOT
   • Place DEEBOT on the Docking Station making sure the Charging Contacts on DEEBOT and the Docking Station Pins make a connection.
   • Charge DEEBOT for at least 4 hours before the first use.
     
     * Please make sure the Power Switch is turned ON before charging. ("O" indicates OFF and "I" indicates ON).
     * AUTO Mode Button blinks slowly when DEEBOT is charging. AUTO Mode Button stops glowing when DEEBOT is fully charged.
     * When DEEBOT completes the cleaning cycle or when battery power gets low, DEEBOT automatically returns to the Docking Station to recharge itself. DEEBOT can also be sent back to the Docking Station at any time by using ECOVACS App or by pressing the AUTO Button on the robot for 3 seconds.
     * Empty any remaining water from the Reservoir and remove the Cleaning Cloth Plate before charging DEEBOT.
5. Start
   • Press the AUTO Mode Button on DEEBOT. DEEBOT moves around to scan the environment and build the map, and starts to work in AUTO Cleaning Mode at the same time.
     
6. Pause
   • Pause DEEBOT by pressing the AUTO Mode Button on the robot.
     
     * The robot's Control Panel stops glowing after the robot is paused for more than 10 minutes. Press AUTO Mode Button on DEEBOT to wake up the robot.
7. Power OFF
   • Pause DEEBOT. Open the robot's Top Cover. Move the Power Switch to the OFF position to power OFF. "I"=power ON; "O"=power OFF.
     
     * When DEEBOT is not working, it is suggested to keep it powered ON and charging.
     * For models with app-connectivity, various functions can be performed using the ECOVACS App.

Cleaning Mode Selection

DEEBOT has several Cleaning Modes to choose from to effectively clean different floors. Cleaning Modes are selected using the or ECOVACS App.

1. AUTO Cleaning Mode
   • This is the most commonly used mode. In AUTO Cleaning Mode, DEEBOT cleans in a back and forth straight-line pattern.
     
2. Custom Cleaning Mode
   • This mode is fexible for you to choose any area in your home to clean using ECOVACS App.
3. Area Cleaning Mode
   • After DEEBOT has scanned and mapped the environment, specific areas on the map can be selected to be cleaned with Area Cleaning Mode using ECOVACS App

Programming the Robot

Time Scheduling
DEEBOT can be programmed weekly to clean multiple times per day at specific times using the ECOVACS App.

Additional Settings

Virtual Boundary

A Virtual Boundary blocks DEEBOT from cleaning a specified area. The virtual boundary can be set using ECOVACS App.

Continued Cleaning Function

When Continued Cleaning function is turned on, once DEEBOT is fully recharged, it automatically returns to and continues to clean the uncleaned area not completed during the last cleaning task.

Optional OZMO Mopping System

DEEBOT has an optional OZMO Mopping System that uses a Washable/Reusable Microfiber Cleaning Cloth and a Cleaning Cloth Plate attached to a proprietary Reservoir. The Washable/Reusable Microfiber Cleaning Cloth automatically damp mops and then dries the floor to a spotless clean.

* When using the mopping system, DEEBOT automatically detects and avoids the rug.
* After DEEBOT finishes mopping, empty any remaining water from the Reservoir.
* Empty any remaining water from the Reservoir and remove the Cleaning Cloth Plate before charging DEEBOT. * Always keep the Reservoir installed when the robot is cleaning or charging.

1. Add Water into the Reservoir
   
2. Attach Cleaning Cloth; Install the Cleaning Cloth Plate and the Reservoir.
   
3. Start
   Select the desired Cleaning Mode. DEEBOT sweeps, lifts, vacuums, mops and dries in the selected mode.
   

Choosing a Suction Option

The robot has 2 interchangeable suction options for your convenience.

Main Brush Option: The best choice for deep cleaning with a combination of the Main Brush and strong suction. The Main Brush Option comes pre-installed in DEEBOT.

Direct Suction Option: The best choice for daily cleaning with the Main Brush removed for direct suction. This Suction Option is specifically designed to pick up hair without tangling.

Install the Direct Suction Option

Turn the robot over. Push both buttons on the Main Brush Option and remove the Main Brush Cover. Remove the Main Brush.
Line up the Direct Suction Option tabs with the slots on the bottom of the robot. Press until the component clicks into place.

Install the Main Brush Option

Turn the robot over. Push both buttons on the Direct Suction Option and remove Direct Suction Option. Insert the Main Brush into the bottom of the robo.
Line up the Main Brush Cover tabs with the slots on the bottom of the robot. Press until the component clicks into place.

Maintenance

Before performing cleaning and maintenance on DEEBOT, power OFF the robot and unplug the Docking Station.

OZMO Mopping System

After DEEBOT finishes mopping, remove the Reservoir from DEEBOT, and maintain the Reservoir, the Cleaning Cloth and the Cleaning Cloth Plate immediately.
Press the Release Button and pull to remove the Reservoir. Remove the Cleaning Cloth Plate and the Cleaning Cloth.

Wash the Cleaning Cloth and lay flat to dry.

Empty any remaining water from the Reservoir.

Wipe the outside of the Reservoir with a dry cloth and lay flat to dry. Avoid direct sunlight.

Dust Bin and Filters

Open the robot's Top Cover and remove the Dust Bin. Open the Dust Bin Lock and empty the Dust Bin.

Remove the filters. Pat the High Efficiency Filter clean. Do not rinse the High Efficiency Filter under water.

Rinse the Dust Bin and Filter Net under running water.

Dry the Dust Bin and Filter Net completely before reinstalling.

Main Brush, Direct Suction Option and Side Brushes

* A Multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.

Main Brush

Turn the robot over. Push both buttons on the Main Brush Option and remove the Main Brush cover. Remove the Main Brush. Use the Multi-Function Cleaning Tool to cut off and remove any hair tangled around the Main Brush. Clean any tangled hair or debris from the Main Brush.

Direct Suction Option

Wipe the Direct Suction Option clean with a dry cloth.

Side Brushes

Remove the Side Brushes. Remove any hair or debris tangled around the Side Brushes with the provided Multi-Function Cleaning Tool, and wipe their slots with a clean cloth.

Other Components

Use the Multi-Function Cleaning Tool to cut off and remove any hair tangled around the Universal Wheel.

Wipe the Anti-Drop Sensors with the brush of the Multi-Function Cleaning Tool to maintain their effectiveness.

Wipe the Bumper with the brush of the Multi- Function Cleaning Tool.

* Before cleaning the robot's Charging Contacts and Docking Station Pins, power OFF the robot and unplug the Docking Station.

Wipe the robot's Charging Contacts and Docking Station Pins with a dry cloth to maintain their effectiveness.

Regular Maintenance

To keep DEEBOT running at peak performance, perform the maintenance and replacement according to the following frequency. A multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.

Note: ECOVACS manufactures various replacement parts and assemblies. Please contact Customer Service for more information on replacement parts.