ECOVACS ECO D62 Instruction Manual page 135

ENG
Enjoy smarter life
Remove the two screws using a coin or a screw driver.
Remove the frame by lifting up on the end where the were screws.
Remove the main brush by lifting on the end of brush.
Remove any hair, dust and debris from the crevices on each side of
the brush chamber.
Using the supplied tool, proceed to cut the hair, threads, etc. from
the main brush. Then remove and dispose of the debris into the
waste basket
Place the main brush in to the right possition and turn the brush to
check that it is correctly positioned.
Replace the screw with a coin or screw driver, seat the screw into
the frame until they have stopped.
Finally, wipe away any dirt or dust on the squeegee with a clean
cloth.
ENG - 135