Up-ground height sensor cleaning
Dust sensor cleaning
Up-ground height sensor is on the front bottom of robot. It can
detect the height difference over 8 centimeters. After cleaning,
replace the Side Brush by matching the brush hub color to the slot
color and then press down in the center of the Brush until you hear
a „click" noise. Give a slight tug on the brush to make sure it is
securely assembled
1.
Turn off the power and remove the trash inside dust box.
2.
Invert the robot, then put it on the even and clean platform.
3.
Use dry cotton cloth to wipe three pieces of optical board of
up-ground height sensor.
The dust sensor is located at the front of dust entrance. It is able
to detect the concentration of dust so that it can choose efficient
mode to work. We suggest you to clean dust sensor once you
clean dust box to improve work efficiency.
1. Turn the unit's power off.
2. Remove the dust box and clean the sensors with soft dry cloth.
3. Clean the dust sensors each time the dust box is removed.
4. Frequent cleaning is recommended to ensure optimum
performance of your Deebot.
ENG
Enjoy smarter life
ENG - 137