Sponge Filter Replacement; Main Brush Cleaning - ECOVACS Deebot D56 User Manual

Sponge Filter Replacement

Main Brush Cleaning

1 1
Undo the screw fixed on the
main brush.
Remove the hair and dust
which is in-between the belt.
Put the main brush back to the
host and take care of the
anastomosis of belt.
18
Tips:
Take off the frame of main brush.
4 4
Rip off the hair on main brush
(with equipped roll brush
cleaning gadget to break off the
hair on main crush along the
groove.
7
Fix the frame into host.
Clean the main brush after it has operated for 4 or 5 recycles.
2
4 5
8
1. Open the cover of the Deebot,
take out the dust box.
2. Push aside the lock catch of the
dust box ,then open the dust box
and clean it.
3. Extract the axle of the dust box's
cover.
4. Replace the sponge filter and fix
the cover ,then put it back into
Deebot.
2
Take out one side of main
brush from the belt.
Wipe the dust on the roller
and put it back.
Tie up the screw.
1
3
1
2
6
1 9